Nonlinear Shear Buckling Parametric Finite-Element Analysis of Corrugated Steel Webs
نویسندگان
چکیده
منابع مشابه
Finite Element Analysis of Buckling of Corrugated Fiberboard
This paper investigates the relationship between mechanical behaviors and shape of corrugated fiberboard by means of buckling analysis, which is done by FEM (Finite Element Method). Firstly, after analyzing the structure of corrugated fiberboard a single-wall corrugated fiberboard model was built. The buckling load was measured in the ideal condition by linear buckling analysis (eigenvalue buck...
متن کاملFinite Element Method for Static Cyclic Behavior of Steel Shear Wall with Corrugated Plates
The system of steel shear wall is an initiative resistance system against the lateral load such as an earthquake and the wind that has been researched in the last three decades. Currently, this system is noticed more than other systems because of adequate stiffness, ductility, and more energy absorption. The system of steel shear wall with corrugated sheets has been offered as an innovative sys...
متن کاملFinite Element Analysis of Thin Steel Plate Shear Walls
Steel plate shear walls (SPSWs) in buildings are known to be an effective means for resisting lateral forces. By using un-stiffened walls and allowing them to buckle, their energy absorption capacity will increase significantly due to the postbuckling capacity. The post-buckling tension field action of SPSWs can provide substantial strength, stiffness and ductility. This paper presents the Fini...
متن کاملDesign aspects of steel I-girders with corrugated steel webs
Corrugated web girders represent a new structural system emerged in the past two decades. The girder’s flanges provide the flexural strength of the girder with no contribution from the corrugated web which provides the girder’s shear capacity. Failure of the web occurs by steel yielding, web buckling or interactively between them. Lateral torsion and local flange buckling of corrugated web gird...
متن کاملFinite Element Instability Analysis of the Steel Joist of Continuous Composite Beams with Flexible Shear Connectors
Composite steel/concrete beams may buckle in hogging bending regions. As the top flange of I-beam in that arrangement is restricted from any translational deformation and twist, the web will distort during buckling presenting a phenomenon often described as restricted distortional buckling. There are limited studies available in the literature of restricted distortional buckling of composite st...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Modern Applied Science
سال: 2014
ISSN: 1913-1852,1913-1844
DOI: 10.5539/mas.v8n4p223