Numerical Investigation of Flow Control by Suction and Injection on a Subsonic Airfoil
نویسندگان
چکیده
منابع مشابه
Numerical Study of Blowing and Suction Control Mechanism on NACA0012 Airfoil
A jet with a width of 2.5% the chord length is placed on a NACA0012 airfoil’s upper surface simulating the blowing and suction control under Re = 5 × 105 and angle-of-attack 18-deg conditions. Nearly 300 numerical simulations are conducted over a range of parameters (jet location, amplitude, and angle). The physical mechanisms that govern suction and blowing flow control are determined and anal...
متن کاملOn Numerical Simulation of Airfoil Vibrations Induced by Compressible Flow∗
The subject of the paper is the numerical simulation of the interaction of twodimensional compressible viscous flow and a vibrating airfoil. The airfoil is considered as a solid body with two degrees of freedom, moving in the vertical direction and rotating around an elastic axis. The numerical simulation consists of the solution of the Navier-Stokes system by the space discontinuous Galerkin m...
متن کاملNumerical investigation of steady suction control of flow around a circular cylinder
This paper numerically investigates the effectiveness of the control of steady suction on a stationary circular cylinder with several isolated suction holes on the surface at a subcritical Reynolds number. The control effectiveness as a function of the azimuthal position, spanwise spacing and suction flow rate of the suction holes on the control of the aerodynamic forces on the cylinder and the...
متن کاملinvestigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem
در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...
Numerical Simulation of Turbulent Subsonic Compressible Flow through Rectangular Microchannel
In this study, turbulent compressible gas flow in a rectangular micro-channel is numerically investigated. The gas flow assumed to be in the subsonic regime up to Mach number about 0.7. Five low and high Reynolds number RANS turbulence models are used for modeling the turbulent flow. Two types of mesh are generated depending on the employed turbulence model. The computations are performed for R...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: American Journal of Applied Sciences
سال: 2005
ISSN: 1546-9239
DOI: 10.3844/ajassp.2005.1474.1480