Numerical modeling of nonlinear processes of damage accumulation due to cyclic loading
نویسندگان
چکیده
منابع مشابه
energy based structural damage index based on nonlinear numerical simulation of structures subjected to oriented lateral cyclic loading
an energy based damage index based on a new nonlinear finite element (fe) approach applicable to rc structures subjected to cyclic, earthquake or monotonic loading is proposed. the proposed method is based on the evaluation of nonlinear local degradation of materials and taking into account of the pseudo-plastic hinge produced in the critical sections of the structure. a computer program is dev...
متن کاملDamage Accumulation in Unreinforced Masonry Due to Seismic Loading
Masonry has low cohesive strength and is susceptible to the brittle failure, when subjected to induced tensile stresses. It fails due to lateral tensile stresses even when masonry prisms are tested in uni-axial static compression and the stress-strain curve remains almost linear up to failure. Although masonry normally resists compressive forces, under lateral in-plane cyclic loads some parts o...
متن کاملInterconnect Failure due to Cyclic Loading
The damage generated by AC currents at 100 Hz in interconnects has been studied and compared with mechanical fatigue damage in thin films. The nature of the damage under the two loading conditions is qualitatively similar, supporting the idea that the AC current damage comes from mechanical cycling due to temperature swings on the order of 100 K from Joule heating in the interconnects. In both ...
متن کاملNumerical and Experimental Study on Ratcheting Behavior of Plates with Circular Cutouts under Cyclic Axial Loading
In this paper, accumulation of plastic deformation of AISI 1045 steel plates with circular cutouts under cyclic axial loading is studied. Loading was applied under force-control conditions. Experimental tests were performed using a Zwick/Roell servo hydraulic machine. Under force-control loading with nonzero mean force, plastic strain was accumulated in continuous cycles called ratcheting. Nume...
متن کاملNondestructive Evaluation of Strain-Induced Phase Transformation and Damage Accumulation in Austenitic Stainless Steel Subjected to Cyclic Loading
Strain-induced phase transformation and damage accumulation in austenitic stainless steel subjected to cyclic loading were investigated by nondestructive evaluation. The cyclic loading test was performed at various strain amplitudes at the same strain rate. The volume fraction of the strain-induced phase transformation (α′-martensite) was determined by ferrite scope and magnetic coercivity meas...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computational Continuum Mechanics
سال: 2013
ISSN: 1999-6691
DOI: 10.7242/1999-6691/2013.6.3.32