Numerical modelling of droplet breakup for flash-boiling fuel spray predictions
نویسندگان
چکیده
منابع مشابه
Numerical Simulation of Flash Boiling Effect in a 3-Dimensional Chamber Using CFD Techniques
Flash Boiling atomization is one of the most effective means of generating a fine and narrow-dispersed spray. Unless its complexity its potential has not been fully realized. In This Paper, a three dimensional chamber has been modeled with a straight fuel injector. Effect of Flash Boiling has been investigated by computational fluid dynamics (CFD) techniques. A finite volume approach with the ...
متن کاملNumerical modelling of thermal spray systems
The purpose of this paper is to present a brief overview of the MD* thermal spray process, review the current existing models of heat transfer and fluid mechanics relevant to this process, outline a simplified thermal model implemented together with the results, and discuss the activities required for the implementation and verification of an accurate temperature model of the MD* thermal spray ...
متن کاملNumerical modelling of sequential droplet impingements
During the process of thermal spray coating, molten powders are sprayed and deposited on substrates to generate protective coatings. It is essential to have a clear understanding of the physics of droplet impingement on the surface of substrates for better control of the generation of splats and the structure of coating. A numerical model is developed in this paper to simulate the dynamics of t...
متن کاملDevelopment of Maximum Entropy Method for Prediction of Droplet-size Distribution in Primary Breakup Region of Spray
Droplet size distributions in the cold spray of a fuel are important in observed combustion behavior. Specification of droplet size and velocity distributions in the immediate downstream of injectors is also essential as boundary conditions for advanced computational fluid dynamics (CFD) and two-phase spray transport calculations. This paper describes the development of a new model to be incorp...
متن کاملExperimental and numerical modelling of nasal spray atomisation
Spray atomization is a common process found in different industries, where sprays under high injection pressure are widely recorded in the literature. Nonetheless, research on spray breakup mechanism under low pressure in pharmaceutical industry is still relatively rare. Numerical model in the Lagrangian approach was modified for simulating the spray formation from a nasal spray device in the c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Multiphase Flow
سال: 2020
ISSN: 0301-9322
DOI: 10.1016/j.ijmultiphaseflow.2019.103183