Numerical simulation of scale-up effects of methanol-to-olefins fluidized bed reactors

Simulation and Control of a Methanol-To-Olefins (MTO) Laboratory Fixed-Bed Reactor

In this research, modeling, simulation, and control of a methanol-to-olefins laboratory fixed-bed reactor with electrical resistance furnace have been investigated in both steady-state and dynamic conditions. The reactor was modeled as a one-dimensional pseudo-homogeneous system. Then, the reactor was simulated at steady-state conditions and the effect of different parameters including...

Numerical simulation of biomass fast pyrolysis in fluidized bed and auger reactors

Seeking a clean alternative energy resource is inevitable because of the limited fossil fuel energy resources and greenhouse gas emissions issue. Recently, advances in chemical and fuel processing technologies allow us to convert biomass to energy products with high energy density and value. Fast pyrolysis process is among the promising technologies for converting biomass to bio-oil and combust...

Multi-scale CFD simulation of hydrodynamics and cracking reactions in fixed fluidized bed reactors

Fixed fluidized bed reactor is widely used to evaluate the crackability of heavy oils and the activity of catalysts. To understand the hydrodynamics, reaction kinetics and thermodynamics in conventional and modified fixed fluidized bed reactors, the computational fluid dynamics method, energy-minimization multi-scale-based two-fluid model coupled with a six-lump kinetic model was used to invest...

24 Fixed Film Stationary Bed and Fluidized Bed Reactors

Simulation for Supporting Scale-Up of a Fluidized Bed Reactor for Advanced Water Oxidation

Simulation of fluidized bed reactor (FBR) was accomplished for treating wastewater using Fenton reaction, which is an advanced oxidation process (AOP). The simulation was performed to determine characteristics of FBR performance, concentration profile of the contaminants, and various prominent hydrodynamic properties (e.g., Reynolds number, velocity, and pressure) in the reactor. Simulation was...