NUMERICAL STUDY OF STALL INCEPTION IN A TRANSONIC AXIAL COMPRESSOR ROTOR BASED ON THE THROTTLE MODEL

Laser Anemometer Measurements in a Transonic Axial Flow Compressor Rotor

Numerical Investigation of Rotating-Stall in a Stage of an Axial Compressor with Two Different Approaches

An unsteady two-dimensional finite-volume solver was developed based on Van Leer’s flux splitting algorithm in conjunction with “Monotonic Upstream Scheme for Conservation Laws (MUSCL)” limiters and the two-layer Baldwin-Lomax turbulence model was also implemented. To validate the solver, two test cases were prepared and the computed results had good agreements with reference data. The rotating...

Aerostructural Optimization of a Transonic Compressor Rotor

This paper presents a framework for multi-objective and multidisciplinary design optimization using highfidelity analysis tools. In this framework the aerodynamic performance is evaluated based on a Navier–Stokes equation solver, and the structure dynamics is computed using commercially available finite element software. We employ a genetic algorithm as a robust design optimization tool to faci...

a study on insurer solvency by panel data model: the case of iranian insurance market

the aim of this thesis is an approach for assessing insurer’s solvency for iranian insurance companies. we use of economic data with both time series and cross-sectional variation, thus by using the panel data model will survey the insurer solvency.

The Effect of Ultrapolish on a Transonic Axial Rotor

Back-to-back testing has been done using NASA fan rotor 67 in the Glenn Research Center W8 Axial Compressor Test Facility. The rotor was baseline tested with a normal industrial RMS surface finish of 0.5-0.6 μm (20-24 microinches) at 60, 80 and 100% of design speed. At design speed the tip relative Mach number was 1.38. The blades were then removed from the facility and ultrapolished to a surfa...