Off-Axis Ratcheting Behavior of Unidirectional CFRP Laminate at High Temperature and Its Phenomenological Modeling
نویسندگان
چکیده
منابع مشابه
Steel–CFRP Composite (CFRP Laminate Sandwiched between Mild Steel Strips) and It-s Behavior as Stirrup in Beams
In this present study, experimental work was conducted to study the effectiveness of newly innovated steel-CFRP composite (CFRP laminates sandwiched between two steel strips) as stirrups. A total numbers of eight concrete beams were tested under four point loads. Each beam measured 1600 mm long, 160mm width and 240 mm depth. The beams were reinforced with different shear reinforcements; one wit...
متن کاملHigh Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملMODELING HIGH TEMPERATURE FLOW BEHAVIOR OF AN AL 6061 ALUMINIUM ALLOY
Hot deformation behavior of a medium Cr/Mn Al6061 aluminum alloy was studied by isothermal compression test at temperatures range of 320 to 480 °C and strain rates range of 0.001 to 0.1 s −1. The true stresstrue strain curves were analyzed to characterize the flow stress of Al6061. Plastic behavior, as a function of both temperature and strain rate for Al6061, was also modeled using a hyperboli...
متن کاملTungsten Behavior at High Temperature and High Stress
Recently reported results on the behaviour of the tungsten under conditions expected in the Neutrino Factory target have strengthened the case for a solid target option for the Neutrino Factory. This paper gives a description of the measurements of the surface motion of tungsten wires, stressed by a pulsed current, using a Laser Doppler Vibrometer in order to measure tungsten properties at high...
متن کاملComparison of Tribological Behavior of Deep Cryogenic Treated Hot Work Tool Steel at Room and High Temperature
The deep cryogenic treatment is a complementary operation that is done on a variety of tool steels aimed at improving their abrasion resistance and hardness. In the case of the H13 hot-work steel, which is widely used at high temperatures as a hot-deformation tool, we need to determine the efficiency of subzero treatment on it at the working temperature. In this regard, this paper is focu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Composite Materials
سال: 2011
ISSN: 0385-2563,1884-8559
DOI: 10.6089/jscm.37.46