On the Flow in a Centrifugal Impeller : 2nd Report, Effects of Change in Impeller Width
نویسندگان
چکیده
منابع مشابه
the effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
Evaluation of floating impeller phenomena in a gyro centrifugal pump.
The Gyro centrifugal pump, developed as a totally implantable artificial heart, was designed with a free impeller in which the rotational shaft (male bearing) of the impeller was completely separated from the female bearing. For this type of pump, it is very important to keep the proper magnet balance (impeller-magnet and actuator-magnet balance) to prevent thrombus formation or bearing wear. W...
متن کاملEffect of impeller geometry on performance characteristics of centrifugal compressor
Centrifugal Compressors play an essential role in oil, gas and petrochemical industries. Their extensive usage is due to their smooth operation and high reliability compared to other other compressor types. One of the main characteristics of these turbomachines is their performance curve, which is an important criterion for selecting the appropriate compressor for a desired working condition. I...
متن کاملEffects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE)
Centrifugal compressors produce high pressure ratio and rotate at speeds. So, a tiny unbalance can produce severe vibration. In this paper, effects of impeller gap on rotor vibration in a high speed centrifugal compressor is investigated. For this purpose, a numerical and experimental analysis are carried out. The moving reference frame method in FLUENT software is used for modeling of geometri...
متن کاملNumerical Calculation of the Flow in a Centrifugal Pump Impeller Using Cartesian Grid
The simulation of the three-dimensional turbulent flow in turbomachines is currently based on the solution of the Reynolds Averaged Navier Stokes equations. A considerable computational effort usually goes to the mesh generation process due to the complexity of the impeller geometry. The use of Cartesian grids combined with a numerical technique for solving partially blocked cells is presented ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1977
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.43.1776