One-Step Fabrication of Microchannels with Integrated Three Dimensional Features by Hot Intrusion Embossing
نویسندگان
چکیده
منابع مشابه
One-Step Fabrication of Microchannels with Integrated Three Dimensional Features by Hot Intrusion Embossing
We build on the concept of hot intrusion embossing to develop a one-step fabrication method for thermoplastic microfluidic channels containing integrated three-dimensional features. This was accomplished with simple, rapid-to-fabricate imprint templates containing microcavities that locally control the intrusion of heated thermoplastic based on their cross-sectional geometries. The use of circu...
متن کاملFabrication of Polymer Splitter by Micro Hot Embossing Technique
This research focuses on the manufacturing of 1 by 4 multimode polymer splitter. MEMS fabricating process was first adopted for the fabrication of four inches silicon mold insert and then the micro hot embossing technique was applied to the optical class PMMA material for splitters. The BeamPROPTM simulation software was utilized for the design of optimal silicon mold insert. In the analysis of...
متن کاملFabrication of Switches on Polymer-Based by Hot Embossing
In MEMS technology, most of the devices are fabricated on glass or silicon substrate. However, this research presents a novel manufacture method that is derived from conventional hot embossing technology to fabricate the electrostatic switches on polymer material. The procedures of fabrication involve the metal deposition, photolithography, electroplating, hot embossing and hot embed techniques...
متن کاملDimensional accuracy of three impression materials by one-step and two-step impression techniques: An in vitro study
Introduction: An accurate impression is essential to create a well-fitted dental prosthesis. This study aimed to compare the dimensional accuracy of three elastomeric materials using one-step and two-step impression techniques. Methods: In this study, 20 impressions were fabricated for each Vinyl siloxane ether (Identium), condensation silicone (Speedex), and a...
متن کاملHot embossing for fabrication of a microfluidic 3D cell culture
Clinically relevant studies of cell function in vitro require a physiologically-representative microenvironment possessing aspects such as a 3D extracellular matrix (ECM) and controlled biochemical and biophysical parameters. A polydimethylsiloxane (PDMS) microfluidic system with a 3D collagen gel has previously served for analysis of factors inducing different responses of cells in a 3D microe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2016
ISSN: 1424-8220
DOI: 10.3390/s16122023