Optimal selection of parameters in CNC end milling of Al 7075 T6 alloy by TBLO
نویسندگان
چکیده
منابع مشابه
Modeling and Analysis of CNC Milling Process Parameters on Aluminium Silicate Alloy
With the increasing demands of high surface irregularities and machining of composites, conventional machining processes are now being replaced by high speed Computer Numerical Control (CNC) machines. In this paper aluminium silicate made from alloying aluminium and silicon oxide made from rice husk are used. The machining of the alloy on CNC machine is carried out. In addition to speed, feed a...
متن کاملinvestigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem
در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...
تضعیف امواج آکوستیک در Al 7075-T6 و St 304
Propagation and dispersion of acoustic waves is one of the important phenomena in physics. Acoustic-waves are nowadays widely used in a variety of applications ranging from underwater communications, identification and specification of the internal defects of materials to extracorporeal shock wave lithotripsy. Apart from application and utilization of such phenomena, study on production and pro...
متن کاملDEA-based Taguchi method for Optimization of CNC End milling Process parameters
In any machining operations, quality and productivity are the two important conflicting objectives. In order to give assurance for high productivity, some extent of quality has to be compromised. Similarly productivity will be decreased while the efforts are channelized to enhance quality. Therefore it is essential to optimize both quality and productivity simultaneously. Surface roughness and ...
متن کاملRefining Mechanism of 7075 Al Alloy by In-Situ TiB2 Particles
The nucleation undercooling of TiB₂/7075 Al matrix composites, the microstructure observed after solidification at different cooling rate, and the size and distribution of TiB₂ particles were investigated. The experimental results have shown that the grain sizes of TiB₂/7075 Al matrix composites firstly decreased, then increased, and finally decreased again with the increase of TiB₂ content. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Engineering Sciences
سال: 2019
ISSN: 0976-6693
DOI: 10.36224/ijes.110405