Optimization Design of Tension Machine Frame Based on Solidworks and ANSYS Workbench

Design of Rotary Root Stubble Digging Machine Based on Solidworks

In the paper, the necessity of root stubble harvesting and recycling was put forward from the perspective of biomass energy utilization. To accomplish mechanized harvesting on root stubble, a rotary digging machine was designed based on parametric modeling software Solidworks. Firstly, parts were built under entity modeling module, and then assembled to 4 main mechanisms in assembling environme...

ANSYS Workbench User's Guide

Design Optimization of Actuators Using ANSYS

Research and development on actuators has been accelerated with the aid of virtual prototyping software, like ANSYS. This is illustrated with two successful cases using ANSYS to design and optimize micro-electromechanical actuators. The first case is topology optimization of head suspension assembly for hard disk drive. The second case is design optimization of polymeric thermal micro-actuator....

Component Mode Synthesis in ANSYS Workbench Simulation

At ANSYS Workbench 11.0, the ANSYS Rigid Dynamics add-on module enables users to define joint connections in complex kinematic assemblies. This ability to model rigid and flexible parts in ANSYS Workbench Simulation via joints is beneficial since the rigid parts are modeled with mass and rigid links (that is, rigid contact elements), thus providing load transfer capabilities and allowing users ...

Finite Element Analysis Of Disc Brake By ANSYS Workbench

The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...