Optimization Drilling Parameters of Aluminum Alloy Based on Taguchi Method
نویسندگان
چکیده
منابع مشابه
Modeling and optimization of end milling parameters on aluminum 6061 alloy using GRA based Taguchi method coupled with PCA
Quality and productivity are two important aspects for manufacturing industries. Modeling and optimization is the best technique applied to find the best manufacturing conditions. This technique has been applied to investigate the optimized design of the cutting process in end milling for Al 6061 alloy in order to provide better surface finish as well as high Material Removal Rate (MRR). The cu...
متن کاملOptimization of Drilling Parameters on Delamination Based on Taguchi Method in Drilling of Natural Fiber Reinforced (Agave) Composite
Agave is the one of the abundantly available plant in India. The wide application of agave reinforced composite plate necessitate the joining of two plates together. For making such joint drilling of those plates is required. Drilling of natural fiber composites is different from the other metals because of its mechanical properties. The major problem faced in drilling of theses natural fiber c...
متن کاملOptimization of WEDM Process Parameters on Titanium Alloy Using Taguchi Method
This paper describes an optimum cutting parameters for Titanium Grade5 (Ti-6Al-4V) using Wire-cut Electrical Machining Process (WEDM). The response of Volume Material Removal Rate (MRR) and Surface Roughness (Ra) are considered for improving the machining efficiency. A brass wire of 0.25mm diameter was applied as tool electrode to cut the specimen. The Experimentation has been done by using Tag...
متن کاملOptimization on Delamination of Cutting Parameter during Drilling on Gfrp Plastics Based on Taguchi Method
Drilling of glass fibre reinforced plastic (GFRP) composite is different from metallic materials due to its mechanical properties. The drilling of this material may generate delamination of drilled holes on workpiece. The purpose of this paper is to investigate the influence of the cutting parameters, such as cutting speed and feed rate, point angle of drill and material thickness on delaminati...
متن کاملOptimization of Process Parameters in Drilling of Smc Composites Using Taguchi Method
Original scientific paper This paper has presented and discussed machinability in the drilling of SMC (Sheet Mould Compound) A-Class composite materials using Taguchi's DoE method. The thrust forces, surface roughness and push-out peel-up delamination behaviour in drilling process for glass fibre reinforced SMC composites have been evaluated. The experimental results and the contribution ratio ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Al-Khwarizmi Engineering Journal
سال: 2019
ISSN: 2312-0789,1818-1171
DOI: 10.22153/kej.2018.12.001