Optimization of Pore Walls Microstructure in Open Cell Aluminum Foams Utilizing Self-Propagating Reaction
نویسندگان
چکیده
منابع مشابه
DAMPING PROPERTIES OF OPEN PORE ALUMINUM FOAMS PRODUCED BY VACUUM CASTING AND NaCl DISSOLUTION PROCESS
L. Dahil, Istanbul Arel University, Department of Mechanical and Metal Technologies, Turkey, A. Karabulut, Afyon Kocatepe University, Faculty of Technology, MechanicalEngineering, Turkey, S. Baspınar, Afyon Kocatepe University, Technical EducationFaculty, Turkey In this study,damping ratios of 3 samples made of aluminum foam material, which have diff erent-density pores, were calculated, the ef...
متن کاملCreep of aluminum syntactic foams
Aluminum syntactic foams with densities of 1.2–1.5 g/cm3 were deformed at 500 ◦C under constant uniaxial compressive stresses ranging from to 14 MPa. The foam creep behavior is characterized by a short primary stage and a long secondary stage where the strain rate is constant and inimum, followed by a tertiary stage at high stresses. The minimum strain rate varies with stress according to an ap...
متن کاملImproving the energy absorption of closed cell aluminum foams
Closed cell aluminum foams have received much recent attention as energy absorbing materials on account of their ability to undergo extensive deformation at a relatively low stress called the plateau stress. Several studies describe the improvements in energy absorption to be obtained, relative to their empty counterparts, when foam filled tubes are crushed either quasi-statically or dynamicall...
متن کاملEffect of the microstructure closed pore content on the acoustic behavior of polyurethane foams
The present paper proposes to investigate the links between the microstructure of polyurethane foams and their sound absorbing efficiency, and more specifically the effect of membranes closing the cells. This study is based on the complete characterization of 15 polyurethane foam with various cell sizes and reticulation rates (i.e., open pore content): (i) characterization of the microstructure...
متن کاملMicrostructure anisotropy in polyolefin flexible foams
Abstract. The use of polyolefin flexible foams with typical thicknesses between 1 and 3 mm produced by a physical foaming extrusion process is nowadays quite widespread in the packaging sector. Their high flexibility and closed-cell structure allows them to show good energy absorption properties under low loading conditions. Although the compressive response of these materials is well known, th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2019
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.mt-m2019124