Organic Solar Cells with CuO Nanoparticles Mixed PEDOT:PSS Buffer Layer
نویسندگان
چکیده
منابع مشابه
Fabrication Of Cu(In,Ga)Se2 Solar Cells With In2S3 Buffer Layer By Two Stage Process
Cu(In,Ga)Se2 thin films (CIGS) on metallic substrate (titanium, molybdenum, aluminum, stainless steel) were prepared by a two-step selenization of Co-evaporated metallic precursors in Se-containing environment under N2 gas flow. Structural properties of prepared thin film were studied. To characterize the optical quality and intrinsic defect nature low-temperature photoluminescence, were perfor...
متن کاملHigh efficient Perovskite solar cells base on Niobium Doped TiO2 as a Buffer Layer
Here, the effect of lightly Niobium doped TiO2 layer on the performance of perovskite solar cells has been studied by using solar cell capacitance simulator (SCAPS). N addition, the effects of Niobium concentration, buffer film thickness and operating temperature on the performance of the perovskite solar cell are investigated. For doping level of 3.0 mol% into the TiO2 layer, cell efficiency o...
متن کاملIn situ-prepared composite materials of PEDOT: PSS buffer layer-metal nanoparticles and their application to organic solar cells
We report an enhancement in the efficiency of organic solar cells via the incorporation of gold (Au) or silver (Ag) nanoparticles (NPs) in the hole-transporting buffer layer of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), which was formed on an indium tin oxide (ITO) surface by the spin-coating of PEDOT:PSS-Au or Ag NPs composite solution. The composite solution was synt...
متن کاملCorrection: in situ-prepared composite materials of PEDOT: PSS buffer layer-metal nanoparticles and their application to organic solar cells
Correction statement In the Methods section of our published article [1], we mentioned that “we developed a novel in situ means of preparing stabilized Au or Ag NPs...”. However, we have recently noticed that the similar process has been reported by Moreno et al. [2]. Hence, we correct the statement in our manuscript by crediting the work by Moreno et al. [2]: [Before Correction] “We developed ...
متن کاملUltraviolet-ozone-treated PEDOT:PSS as anode buffer layer for organic solar cells
Ultraviolet-ozone-treated poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)was used as the anode buffer layer in copper phthalocyanine (CuPc)/fullerene-based solar cells. The power conversion efficiency of the cells with appropriated UV-ozone treatment was found to increase about 20% compared to the reference cell. The improved performance is attributed to the increased work ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Institute of Electrical and Electronic Material Engineers
سال: 2014
ISSN: 1226-7945
DOI: 10.4313/jkem.2014.27.2.121