Pb and Co removal from paint industries effluent using wood ash
نویسندگان
چکیده
منابع مشابه
Cadmium Removal from Aqueous Solutions Using Saxaul Tree Ash
Cadmium can be found in wastewater in high concentrations and can cause dangerous effect on aqueous environment and human health. At present, many methods have been used to heavy metals removal. Among this clean up techniques, adsorption techniques by using low-cost adsorbent are more considerable. In this study, batch adsorption experiments were conducted for removal of cadmium ions from a...
متن کاملFaecal-wood biomass co-combustion and ash composition analysis
Fuel blending is a widely used approach in biomass combustion, particularly for feedstocks with low calorific value and high moisture content. In on-site sanitation technologies, fuel blending is proposed as a pre-treatment requirement to reduce moisture levels and improve the physiochemical properties of raw faeces prior to drying. This study investigates the co-combustion performance of wood ...
متن کاملSimultaneous Ash and Sulphur Removal from Bitumen Using Column Flotation Technique: Experiments, RSM Modeling and Optimization
An efficient method was employed for the ash and pyrite sulphur removal from bitumen using column flotation process. The bitumen samples containing 9.6% sulphur (6.81% in the pyrite sulphur form) and 26.4% ash were successfully showed up to 75.20% of pyrite sulphur (e.g.; 51.66% of total sulphur) and 70.81% of ash removal. The Box-Behnken Design (BBD) was employed to design the experiments, to ...
متن کاملStudies on the Removal of AOX from Bleached Kraft Mill Effluent with Bark Boiler Ash
A laboratory study was carried out to determine the effect of bark boiler ash on AOX concentration in bleach plant effluent. The removal of A O X was found not to be significant at typical daily discharge rates of boiler ash. To remove significant amounts of AOX, extremely large quantities of ash were required. When incremental quantities of ash were added to the bleach plant effluent, an incre...
متن کاملAsh and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling
This study investigates removing ash and pyrite sulphur from bitumen by column flotation process. Central composite design (CCD) of response surface methodology (RSM) was applied for modeling and optimization of the percentage of ash and pyrite sulphur removal from bitumen. The effects of five parameters namely the amounts of collector and frother agents, particle size, wash water rate and feed...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Environmental Science & Technology
سال: 2008
ISSN: 1735-1472,1735-2630
DOI: 10.1007/bf03326015