Pool Boiling of Water on Surfaces with Open Microchannels
نویسندگان
چکیده
منابع مشابه
Fabrication of nanowires on orthogonal surfaces of microchannels and their effect on pool boiling
A novel microfabrication technique was developed to create silicon nanowires (SiNWs) on orthogonal surfaces of microchannels machined on top of a silicon wafer. Using a two-step metal-assisted etching process, the SiNW for the first time could be selectively fabricated on two different crystalline directions—the channel top and bottom surfaces oriented in the (1 0 0) direction while the sidewal...
متن کاملPool Boiling Heat Transfer Enhancement Through Nanostructures on Silicon Microchannels
Uniform silicon nanowires (SiNW) were successfully fabricated on the top, bottom, and sidewall surfaces of silicon microchannels by using a two-step electroless etching process. Different microchannel patterns with the channel width from 100 to 300 lm were first fabricated in a 10 mm 10 mm silicon chip and then covered by SiNW with an average height of 10–20 lm. The effects of the microchannel ...
متن کاملPool boiling from GEWA surfaces in water and R-113
This reproduction was made from a copy of a manuscript sent to us for publication and microfilming. While the most advanced technology has been used to pho tograph and reproduce this manuscript, the quality of the reproduction is heavily dependent upon the quality of the material submitted. Pages in any manuscript may have indistinct print. In all cases the best available copy has been filmed....
متن کاملPool Boiling Heat Transfer in Water/Amines Solutions
In this investigation, nucleate boiling heat transfer coefficients were experimentally measured during pool boiling of mixtures, consisting of water/monoethanolamine and water/diethanolamine on a horizontal heating rod, under atmospheric pressure. The experiment was carried out below 205 kW.m-2 heat flux, over a wide range of concentrations. These experiments include, measurement of pool boilin...
متن کاملEffect of open microchannel geometry on pool boiling enhancement
Pool boiling enhancement through surface modification has garnered the attention of many researchers for extending the limits of heat flux dissipation. Simulated copper chips were used in a pool boiling setup with water boiling at atmospheric pressure. Heat transfer performance of different microchanneled surfaces was compared to that of a plain surface. The results of the study showed that the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2021
ISSN: 1996-1073
DOI: 10.3390/en14113062