Potential and challenges for the new method supercritical CO2/H2O mixed fluid huff-n-puff in shale oil EOR

Using Huff n’ Puff with a Recycled Hydrocarbon Gas as a Means for Enhancing Oil Recovery in a Liquid-Rich Shale Reservoir APPROVED BY SUPERVISING COMMITTEE:

An Experimental Investigation of Feasibility of Gas Huff and Puff for Recovering Crude Oil with Different Viscosities

Investigating multi cyclic gas (N2 and CO2) huff and puff have been conducted by long sandpack simulations with four different crude oils from Jiangsu oilfield. According to the production differential pressure and the production regularity during huff and puff, the production process was divided into three sections; the first one is free gas production section; the second section is low viscou...

the search for the self in becketts theatre: waiting for godot and endgame

this thesis is based upon the works of samuel beckett. one of the greatest writers of contemporary literature. here, i have tried to focus on one of the main themes in becketts works: the search for the real "me" or the real self, which is not only a problem to be solved for beckett man but also for each of us. i have tried to show becketts techniques in approaching this unattainable goal, base...

Integrating Embedded Discrete Fracture and Dual-Porosity, Dual-Permeability Methods to Simulate Fluid Flow in Shale Oil Reservoirs

Abstract: The oil recovery factor from shale oil remains low, about 5 to 7% of the oil in place. How to increase oil recovery from shale oil reservoirs is attracting more and more attention. CO2 huff-and-puff was historically considered one of the best approaches to improve the oil rate. Most previous simulation studies have been based on dual porosity, but simulation results from dual-porosity...

A New Method to Calculate the Absolute Amount of High-Pressure Adsorption of Supercritical Fluid

In the paper we developed a new method to determine the absolute amount of adsorption. This method relies on the excess adsorption isotherm and the density profile in the pore of one material. To compute the density profile and decrease complex calculation of obtaining the absolute amount of adsorption we introduced Simplified Local-Density (SLD) model. A few of appropriate parameters were ...