Preparation of Metal-Incorporated SAPO-34 catalysts and their Catalytic Performance in Selective Catalytic Reduction of Nitric Oxide

Ultrasonic and Microwave Pretreatment for Hydrothermal Synthesis of Nanosized SAPO-34 and Their Catalytic Performance in MTO Reaction (RESEARCH NOTE)

In order to enhance the catalytic performance of SAPO-34 catalyst for the reaction of methanol to olefins (MTO), ultrasonic and microwave-assisted aging method were employed in static hydrothermal method to synthesize nano-sized SAPO-34. The effects of the application of this method on the chemical composition, morphology, surface area and total acidity of SAPO-34 were characterized by XRD, FE-...

The selective catalytic reduction of NO over Ce0.3TiOx-supported metal oxide catalysts.

A Ce0.3TiOx oxide carrier was synthesized via a sol-gel process, and Ce0.3TiOx supported metal (M=Cd, Mn, Fe, W, Mo) oxide catalysts were prepared by the method of incipient-wetness impregnation. The catalysts were characterized by means of X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transfor...

Effect of Crystallization Temperature on the Synthesis of SAPO-34 and its Catalytic Performance in MTO Reaction

comparison of catalytic activity of heteropoly compounds in the synthesis of bis(indolyl)alkanes.

heteropoly acids (hpa) and their salts have advantages as catalysts which make them both economically and environmentally attractive, strong br?nsted acidity, exhibiting fast reversible multi-electron redox transformations under rather mild conditions, very high solubility in polar solvents, fairly high thermal stability in the solid states, and efficient oxidizing ability, so that they are imp...

Preparation of Mn-Based Selective Catalytic Reduction Catalysts by Three Methods and Optimization of Process Conditions

Mn-based catalysts enable high NO x conversion in the selective catalytic reduction of NO x with NH3. Three catalyst-production methods, namely, co-precipitation, impregnation, and sol-gel, were used in this study to determine the optimum method and parameters. The maximum catalytic activity was found for the catalyst prepared by sol-gel with a 0.5 Mn/Ti ratio. The denitrification efficiency us...