Production of Sintered Material used Titanium Fiber by Coiled Sheet Shaving Method
نویسندگان
چکیده
منابع مشابه
Experimental Study on Tensile Properties of a Novel Porous Metal Fiber/Powder Sintered Composite Sheet
A novel porous metal fiber/powder sintered composite sheet (PMFPSCS) is developed by sintering a mixture of a porous metal fiber sintered sheet (PMFSS) and copper powders with particles of a spherical shape. The characteristics of the PMFPSCS including its microstructure, sintering density and porosity are investigated. A uniaxial tensile test is carried out to study the tensile behaviors of th...
متن کاملIdentification of Material Parameters for the Simulation of Acoustic Absorption of Fouled Sintered Fiber Felts
As a reaction to the increasing noise pollution, caused by the expansion of airports close to residential areas, porous trailing edges are investigated to reduce the aeroacoustic noise produced by flow around the airframe. Besides mechanical and acoustical investigations of porous materials, the fouling behavior of promising materials is an important aspect to estimate the performance in long-t...
متن کاملDamage Behavior of Sintered Fiber Felts
The reduction of aircraft noise is important due to a rising number of flights and the growth of urban centers close to airports. During landing, a significant part of the noise is generated by flow around the airframe. To reduce that noise porous trailing edges are investigated. Ideally, the porous materials should to be structural materials as well. Therefore, the mechanical properties and da...
متن کاملSintered material from alkaline basaltic tuffs
he possibility to obtain sintered material from alkaline basaltic tuffs is demonstrated. The parent rock was milled for 10–15 min, the resulting owder was pressed at 100 MPa and the obtained samples were heat-treated in the range of 1000–1140 ◦C. The sintering behaviour and the phase ormation were studied by pycnometry, dilatometry, DTA, XRD and SEM. The final material was obtained by sintering...
متن کاملUse of vitrified urban incinerator waste as raw material for production of sintered glass - ceramics
The crystallisation behaviour of vitrified industrial waste (fly ash from domiciliary solid waste incineration) was examined by differential thermal analysis, X-ray diffractometry and scanning electron microscopy. It was demonstrated that powder processing route was required to transform the vitrified industrial waste into glass-ceramics products. Time-Temperature-Transformation (TTT) diagrams ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2004
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.51.570