Prognostic Methods on Accelerator’s Anode Voltage Regulator

On the traceably accurate voltage calibration of electrostatic accelerators

We describe in detail a calibration method for the terminal voltage of small accelerators used for ion beam analysis, with the elastic resonance of O()O at 3038 keV as the intrinsic measurement standard. The beam energy relative to this resonance is determined with a precision around 300 eV and an evaluated reproducibility of 1.0 keV. We show that this method is both robust and convenient, a...

Hybrid Voltage Regulator for Low Voltage Applications

of the Thesis Fully Integrated Hybrid Voltage Regulator for Low Voltage Applications by Yongwan Park Master of Science in Electrical Engineering Stony Brook University 2016 A novel hybrid regulator topology is proposed to alleviate the weaknesses of existing hybrid topologies. Contrary to the dominant existing practice, a switchedcapacitor converter and a resistorless LDO operate in a parallel ...

The Simple High-voltage Regulator

design of a self tuning voltage regulator for synchronous generators

this paper presents a self-tuning pid (proportional and integral and derivative) controller for regulating terminal voltage synchronous generators. in order to modify the system reponse and to overcome the difficulties of self tuning controllers, a dual rate sampling control system was used. system results demonstrated usfulness of the proposed regulator. the designed controller is simple and c...

Fully on-chip switched capacitor NMOS low dropout voltage regulator

This paper presents a 1.5 V 50 mA low dropout voltage (LDO) regulator using an NMOS transistor as the output pass element. Continuous time operation of the LDO is achieved using a new switched floating capacitor scheme that raises the gate voltage of the pass element. The regulator has a 0.2 V dropout at a 50 mA load and is stable for a wide load current range with loading capacitances up to 50...