Properties of Al/Al2O3-TiO2 composites prepared by powder metallurgy processing
نویسندگان
چکیده
منابع مشابه
B4C-Al Composites Fabricated by the Powder Metallurgy Process
Due to the large thermal neutron absorption cross section of 10B, B4C-Al composites have been used as neutron absorbing materials in nuclear industries, which can offer not only good neutron shielding performance but also excellent mechanical properties. The distribution of B4C particles affects the mechanical performance and efficiency of the thermal neutron absorption of the composite materia...
متن کاملProcessing of Diamond Composites for Cutting Tools by Powder Metallurgy and Rotary Forging
This paper shows the manufacture route of the bronze 4% weight diamond composite rope for direct application as diamond wires, and linear saws in the slabbing and cutting of dimension stones. This route consists of powder mix compaction, sintering and rotary forging techniques. Tensile tests were performed, reaching an ultimate tensile strength of 230MPa for the diameter of ∅=1.84mm. Scanning e...
متن کاملMECHANICAL PROPERTIES OF METAL MATRIX COMPOSITES (Al/SiCp) PARTICLES PRODUCED BY POWDER METALLURGY
Metal matrix composites (MMCs) have become attractive for engineering structural applications due to their excellent specific strength property and are increasingly seen as alternative to the conventional materials particularly in the automotive, aerospace and defence industries. Al/SiC MMC has aluminium matrix and the silicon carbide particles as reinforcements and exhibits many desirable mech...
متن کاملCOMPARISON OF MECHANICAL AND ELECTRICAL PROPERTIES OF PIEZOELECTRIC COMPOSITES PZT/ZnO AND PZT/Al FABRICATED BY POWDER METALLURGY
Lead zirconate titanate (PZT) as a piezoelectric ceramic has been used widely in the fields of electronics, biomedical engineering, mechatronics and thermoelectric. Although, the electrical properties of PZT ceramics is a major considerable, but the mechanical properties such as fracture strength and toughness should be improved for many applications. In this study, lead monoxide, zirconium ...
متن کاملFABRICATION OF Al-SiCp COMPOSITES THROUGH POWDER Metallurgy Process and Testing Of Properties
Metal matrix composites are the class of composite materials finding vast applications in automotive, aircraft, defense, sports and appliance industries. A horizontal ball mill has been fabricated for milling of aluminum and SiC particles. The change in powder particle morphology during mechanical alloying of Aluminum and SiC powders using horizontal ball mill was studied. Al-SiCp composites wi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallic Materials
سال: 2021
ISSN: 0023-432X
DOI: 10.4149/km_2021_2_99