Radar Interferometric Measurements With a Planar Patch Antenna Array
نویسندگان
چکیده
منابع مشابه
an infinite planar array of rectangular microstrip patch antenna analysis
the methods which are used to analyze microstrip antennas, are divited into three categories: empirical methods, semi-empirical methods and full-wave analysis. empirical and semi-empirical methods are generally based on some fundamental simplifying assumptions about quality of surface current distribution and substrate thickness. thses simplificatioms cause low accuracy in field evaluation. ful...
15 صفحه اولWideband Capon Beamforming for a Planar Phased Radar Array with Antenna Switching Moon - Sik
Recently, there has been great interest in the development of advanced radar systems with phased arrays [1], [2]. In traditional multichannel radar array systems, the number of receivers should be equal to the number of receiving antennas, so the hardware expense and power consumption are very high [3]. A radar array system based on antenna switching is a promising substitute due to its lower c...
متن کاملNarrowband Microstrip Patch Antenna for Radar Application
This paper presents a novel narrowband microstrip patch antenna for radar application. The proposed antenna consists of rectangular radiating patch which provides a narrowband behavior and relatively good impedance matching working in the band of 3-12 GHz. A parametric study is performed on three different antenna structures. The measured results give three narrow band stable signal transmissio...
متن کاملDesign of Rectangular Microstrip Patch Antenna Array
In this paper the rectangular microstrip patch antenna arrays has been designed for S, C and X-band application by using the IE3D simulator. Roger RT/duroid material with dielectric constant 2.2 and height 1.588 has been used as a substrate material. Microstrip inset line feed has been used for feeding the rectangular patch antenna. Here 1x2 and 1x4 patch antenna array has been designed using s...
متن کاملGrooved Linear Microstrip Patch Antenna Array
A simple impedance matching technique for inset feed grooved microstrip patch antenna based on the concept of coplanar waveguide feed line has been developed and investigated for a printed antenna at X-Band frequency of 10GHz. The proposed technique has been used in the design of Linear Grooved Microstrip patch antenna array. The characteristics of the antenna are determined in terms of Return ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Sensors Journal
سال: 2007
ISSN: 1530-437X
DOI: 10.1109/jsen.2006.890120