Railway Track Loss-of-Stiffness Detection Using Bogie Filtered Displacement Data Measured on a Passing Train

Investigating on the Effects of Random Irregularities of Railway Track by Half-Bogie Model

The vibrations produced by trains include two parts which are deterministic and random vibrations. Due to variation of dynamic loads and patterns of load-time, the random vibration of moving train is one of the most important issues in the field of railway engineering. One of the important sources in producing the train vibrations is rail roughness and irregularities. In this paper, responses o...

Acceleration-Based Quality Assessment of Railway Tracks using a 2D simulation model and recorded track data

Car body acceleration is an important factor affecting track safety and ride comfort, which are two primary aspects of railway systems. Though track level is an important source of wagon body acceleration, no quantitative relation between them is available and the aim of this paper is to propose a method to address this issue. To do so, car body acceleration is determined using a 10 DOF simulat...

railway track stiffness variations – consequences and countermeasures

the track stiffness experienced by a train will vary along the track. sometimes the stiffness variation may be very large within a short distance. one example is when an unsupported sleeper is hanging in the rail. track stiffness is then, locally at that sleeper, very low. at insulated joints the bending stiffness of the rail has a discontinuity implying a discontinuity also of the track stiffn...

Train track expansions of measured foliations

acceleration-based quality assessment of railway tracks using a 2d simulation model and recorded track data

car body acceleration is an important factor affecting track safety and ride comfort, which are two primary aspects of railway systems. though track level is an important source of wagon body acceleration, no quantitative relation between them is available and the aim of this paper is to propose a method to address this issue. to do so, car body acceleration is determined using a 10 dof simulat...