Removal of carbon contamination in ETEM by introducing Ar during electron beam irradiation
نویسندگان
چکیده
منابع مشابه
Reinforcing Multi-Wall Carbon Nanotubes by Electron Beam Irradiation
To prepare the samples for Transmission Electron Microscopy (TEM) imaging and Atomic Force Microscopy (AFM) measurements, as-grown carbon nanotubes were dispersed in isopropanol and sonicated using HD2200 homogenizer with a power of 20W for 5 minutes. To characterize the nanotubes by HRTEM, a droplet of the suspension was put on a Cu TEM grid with a lacey C film. Alternatively, we deposited a d...
متن کاملInvestigating The Role of Helium Bag On Electron Contamination Removal Using Beam NRC
Introduction: Several studies have discussed to the electron contamination caused by the air column between the head of linac and patient for photon beams. Since it is not possible to measure the electron contamination with practical dosimetry, the Monte Carlo technique is an appropriate and accurate choice to calculate particle flounce in radiation therapy. The purpose of t...
متن کاملeffectiveness of hedstroum files and rotary k3 instruments in removal of obturation materials during retreatment in curved canals
چکیده ندارد.
15 صفحه اولTreatment of Synthetic Textile Wastewater by Combination of Coagulation/Flocculation Process and Electron Beam Irradiation
Introduction: Textile wastewaters from dyeing and finishing processes are heavily polluted with dyes, textile auxiliaries and chemicals and have a broad range of pH, high COD concentration and suspended particles. In this study, the efficiency of color and turbidity removal from synthetic textile wastewater samples were investigated by combined process of coagulation/ flocculation and electron ...
متن کاملElectron Beam Irradiation Induced Multiwalled Carbon Nanotubes Fusion inside SEM
This paper reported a method of multiwalled carbon nanotubes (MWCNTs) fusion inside a scanning electron microscope (SEM). A CNT was picked up by nanorobotics manipulator system which was constructed in SEM with 21 DOFs and 1 nm resolution. The CNT was picked up and placed on two manipulators. The tensile force was 140 nN when the CNT was pulled into two parts. Then, two parts of the CNT were co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Microscopy
سال: 2018
ISSN: 0022-2720,1365-2818
DOI: 10.1111/jmi.12759