Removal of some most hazardous cationic dyes using novel poly (NIPAAm/AA/N-allylisatin) nanohydrogel

Removal of Cationic Dyes from Aqueous Solution using Organomodified Nanoclay

In this work, organomodified nanoclay has been used as the adsorbent for the removal ofbasic blue 41, cationic dye from an aqueous solution. The performance of the organomodified nanoclay was tested in a batch system under varying pH (2–12), adsorbent dosage (0.1–2 g L-1), initial dye concentration (10–60 mgL-1), and contact time (5- 100 min). The best conditions were achieved at pH of 7,...

Cationic surfactant modified wood sawdust for removal of acidic dyes

In this paper, application of sawdust prepared from Narra wood (SD) modified with cationic surfactant of cetyltrimethylammonium bromide (SD/CTAB) was used for removal of two typical acid dyes commercially named as Acid Green 25 (AG25) and Acid Red 14 (AR14) from aqueous solutions. The effects of experimental variables, such as pH, initial dye concentration, adsorbent dose, contact time and temp...

A Novel Method for Removal of Hazardous Microplastics from Water Using Magnets

Removal of Water-Soluble Cationic Dyes with TriSyl Silicas

In this study, the adsorption of certain water-soluble cationic dyes, (basic blue 9, basic blue 12, basic blue 17, brilliant cresyl blue, janus green B, basic green 4, basic violet 1, basic violet 3, and thionin) onto TriSyl silicas by batch adsorption at 25◦C was investigated. In the adsorption experiments, Langmuir type adsorption in the Giles classification system was found. Binding paramete...

Removal of hazardous heterocyclic dyes from aqueous solutions with ZnO adsorbent

In this study , Copper oxide as a good and inexpensive adsorbent has been introduced and used for the removal of erythrosine and red carmoisine dyes from several water solutions successfully. The effect of various parameters such as pH, dye concentration, amount of adsorbent, contact time and temperature on removal processing was investigated. Adsorption isothermal data could be interpreted by ...