Resonance Monitoring of a Horizontal Wind Turbine by Strain-Based Automated Operational Modal Analysis
نویسندگان
چکیده
منابع مشابه
Operational Modal Analysis of Wind Turbine Speed- increase Gearbox
Speed increase transmission gear box is the primary vibration and noise source of wind turbine, Operational modal method was adopted to collect impact data and response data of each point based on the gearbox test model. ANSYS finite element model is established to simulate the wind turbine gearbox. Then the modal frequencies of the two methods were compared to ensure the test model is correct....
متن کاملCrack Monitoring of Operational Wind Turbine Foundations
The degradation of onshore, reinforced-concrete wind turbine foundations is usually assessed via above-ground inspections, or through lengthy excavation campaigns that suspend wind power generation. Foundation cracks can and do occur below ground level, and while sustained measurements of crack behaviour could be used to quantify the risk of water ingress and reinforcement corrosion, these crac...
متن کاملA Studyof the Design of Horizontal Axis Wind Turbine
In this using paper a method is presented for the aerodynamic and structural analysis of a horizontal axis wind turbine using simplified methods. In the first part of the program the optimum rotor configuration for twist and chord is determined using the momentum and blade element theories for a rotor without coning or tilting and assuming zero drag average wind velocity. Then coning angle and ...
متن کاملField Demonstration of Real-Time Wind Turbine Foundation Strain Monitoring
Onshore wind turbine foundations are generally over-engineered as their internal stress states are challenging to directly monitor during operation. While there are industry drivers to shift towards more economical foundation designs, making this transition safely will require new monitoring techniques, so that the uncertainties around structural health can be reduced. This paper presents the i...
متن کاملNoise Effects on Modal Parameters Extraction of Horizontal Tailplane by Singular Value Decomposition Method Based on Output Only Modal Analysis
According to the great importance of safety in aerospace industries, identification of dynamic parameters of related equipment by experimental tests in operating conditions has been in focus. Due to the existence of noise sources in these conditions the probability of fault occurrence may increases. This study investigates the effects of noise in the process of modal parameters identification b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2020
ISSN: 1996-1073
DOI: 10.3390/en13030579