Rotary ultrasonic machining of optical K9 glass using compressed air as coolant: A feasibility study
نویسندگان
چکیده
منابع مشابه
Study the Effects of Nano Fluid as a Coolant in Milling Process for Improving Machining Parameters
The aim of this research work is to evaluate the effects of coolant including nano- powder material for the cooling purpose in milling process and comparing the results with the conventional coolant. Generation heat and weak heat transfer reduces the tool life and also deteriorate surface roughness during milling operation. To overcome this problem, it is necessary to use coolant for cooling as...
متن کاملRotary ultrasonic machining of ceramics: design of experiments
Rotary ultrasonic machining is one of the nontraditional machining processes for advanced ceramics. Currently available in literature are publications on theoretical and experimental studies on material removal rates in rotary ultrasonic machining. However, there is no report on the systematic study of the cutting force in rotary ultrasonic machining. Furthermore, the effects of some process pa...
متن کاملParameters Optimization of Rotary Ultrasonic Machining of Glass Lens for Surface Roughness Using Statistical Taguchi’s Experimental Design
An experiment was conducted to compare the effects of ultrasonic and non-ultrasonic on glass lens using rotary ultrasonic machining (RUM) technology. The primary objective of this study is to analyze the experimental results of the grinding operations using Taguchi method. Feed rate and frequency are the main process parameters to be tested in this experiment. A three-level orthogonal array tab...
متن کاملRotary ultrasonic machining of silicon carbide: designed experiments
Silicon carbide (SiC) has found a variety of engineering applications due to its superior properties. However, it is still desirable to study cost-effective processes to machine silicon carbide. This paper presents the results of a designed experimental investigation into Rotary Ultrasonic Machining (RUM) of silicon carbide. A four-variable two-level full factorial design was employed to reveal...
متن کاملDevelopment of Design and Manufacturing Support Tool for Optimization of Ultrasonic Machining (USM) and Rotary USM
Ultrasonic machining (USM) is a mechanical material removal process used to erode holes and cavities in hard or brittle work pieces by using shaped tools, high-frequency and an abrasive slurry. This paper addresses the concept and development of an expert system (ES) for hard and brittle material, such as glass, quartz, diamond, carbides, semi conducting materials, ceramic and graphite which ca...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
سال: 2013
ISSN: 0954-4054,2041-2975
DOI: 10.1177/0954405413506195