SHAKING TABLE TESTS ON ULTIMATE BEHAVIOR OF SLENDER BASE-ISOLATED BUILDINGS SUPPORTED BY LAMINATED RUBBER BEARINGS
نویسندگان
چکیده
منابع مشابه
Experiment of Ultimate Shear Failure and Friction Sliding Performance of Rubber Bearings of Bridges
The results showed that (1) the ultimate shear deformation of the rubber bearings with two fixed end plates reached 300% to 400% of the rubber layer thickness. The damage was mainly focused on the rubber layer fracture. The energy dissipation capacity of the bearings was weak, and the hysteresis curve presented a narrow zonal shape. (2) The rubber bearings with unilateral friction sliding had a...
متن کاملthe washback effect of discretepoint vs. integrative tests on the retention of content in knowledge tests
در این پایان نامه تاثیر دو نوع تست جزیی نگر و کلی نگر بر به یادسپاری محتوا ارزیابی شده که نتایج نشان دهندهکارایی تستهای کلی نگر بیشتر از سایر آزمونها است
15 صفحه اولTHE SHAKING TABLE CONCENTRATOR: INFLUENCE OF TABLE PARAMETERS ON MANGANESE CONCENTRATION
Abstract: point of view. In this study, a shaking-table was used for concentrating a manganese ore sample from the Ghasem Abadarea in Kerman, Iran. Experiments were designed by using LThe influence of each variable and their interactions on the operation of the device was studied. The variables underinvestigation were: table slope, table frequency, water flowrate, feed rate, and particle size. ...
متن کاملOn the Optimum Placement of Dissipators in a Steel Model Building Subjected to Shaking-Table Tests
The following research presents the numerical and experimental results obtained on a reduced scale steel model of a medium-rise building structure dynamically protected with energy dissipaters. The steel-steel friction dissipates energy as the structure undergoes interstory drifts. A preliminary numerical analysis is performed to determine the best position of the friction dampers in the longit...
متن کاملObserved Behavior of Seismically Isolated Buildings
Strong motion recordings from four seismically isolated buildings are used in time-invariant and time-variant modal identification analyses. The buildings are identified as equivalent, time-varying, linear dynamic systems characterized by their time-varying modal parameters (including fundamental-mode natural frequencies, damping ratios, and mode shapes). The identification analyses for each si...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2006
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.71.87_4