Sheath-separate-core nanocomposites fabricated using a trifluid electrospinning
نویسندگان
چکیده
منابع مشابه
Electrospinning of hollow and core/sheath nanofibers using a microfluidic manifold
In this article, we describe a microfluidic approach to fabricate hollow and core/sheath nanofibers by electrospinning. Key benefits in using microfluidic devices for nanofiber synthesis include rapid prototyping, ease of fabrication, and the ability to spin multiple fibers in parallel through arrays of individual microchannels. Hollow poly (vinylpyrrolidone) (PVP) + titania (TiO2) composite an...
متن کاملElectrospun pH-sensitive core-shell polymer nanocomposites fabricated using a tri-axial process.
UNLABELLED A modified tri-axial electrospinning process was developed for the generation of a new type of pH-sensitive polymer/lipid nanocomposite. The systems produced are able to promote both dissolution and permeation of a model poorly water-soluble drug. First, we show that it is possible to run a tri-axial process with only one of the three fluids being electrospinnable. Using an electrosp...
متن کاملNanofibers of cellulose and its derivatives fabricated using direct electrospinning.
A short review with 49 references describes the electrospinninng (ES) process for polysaccharides, cellulose and chitosan, and their derivatives, including cellulose acetate and hydroxypropyl cellulose. A majority of applied studies adopted a two step-process, in which the cellulose acetate was used for the first ES process, followed by acetyl group removal to regenerate cellulose thin fibers. ...
متن کاملSlit-Surface Electrospinning: A Novel Process Developed for High-Throughput Fabrication of Core-Sheath Fibers
In this work, we report on the development of slit-surface electrospinning--a process that co-localizes two solutions along a slit surface to spontaneously emit multiple core-sheath cone-jets at rates of up to 1 L/h. To the best of our knowledge, this is the first time that production of electrospun core-sheath fibers has been scaled to this magnitude. Fibers produced in this study were defect-...
متن کاملMagnesium Ferrite (MgFe2O4) Nanostructures Fabricated by Electrospinning
Magnesium ferrite (MgFe(2)O(4)) nanostructures were successfully fabricated by electrospinning method. X-ray diffraction, FT-IR, scanning electron microscopy, and transmission electron microscopy revealed that calcination of the as-spun MgFe(2)O(4)/poly(vinyl pyrrolidone) (PVP) composite nanofibers at 500-800 degrees C in air for 2 h resulted in well-developed spinel MgFe(2)O(4) nanostuctures. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2020
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2020.108782