Sintering of Fine Oxide Powders: I, Microstructural Evolution

Sintering of Fine Oxide Powders: II, Sintering Mechanisms

Conventional and new sintering mechanisms have been porous compacts is well-known in the ceramic literature. However, several reports have been presented recently that investigated using fine powders of CeO2 and Y2O3 of excellent sinterability. We have verified the validity of Herring’s show that particle/grain size can remain essentially constant up to a density of 92%, and such a resistance t...

Sintering of Zircon Powders

Effect of Mechanical Alloying and Sintering on Phase Transformation, Microstructural Evolution, Mechanical Properties and Density of Zr-Cr Alloy

The purpose of present research was production ofZr-based alloy as the nuclear fuel cladding by mechanical alloying (MA) and sintering process. Firstly, Zr and Cr powders were mechanically alloyed to produce the refractory and hard Zr-10 wt% Cr alloy, and then, the powder mixtures were consolidated by press and following sintering at temperature of 800˚C min. The phase evolution, microstructura...

Microstructural changes, particle tracking and shear localization of fine glass powders

Particle Surface Softening as Universal Behaviour during Flash Sintering of Oxide Nano-Powders

The dissipated electric power in oxide powder compacts, subjected to flash sintering, is several hundreds of W·cm-3. This power is analyzed considering local softening/melting and transient plasma/liquid formation at the particle contacts due to thermal runaway. The sudden increase in compact electric conductivity and dissipated power referred to current percolation through the softening/liquid...