Sizing Subsurface Defects in Metallic Plates by Square Pulse Thermography Using an Oriented Gradient Map
نویسندگان
چکیده
منابع مشابه
Detection of Subsurface Defects using Active Infrared Thermography
Active infrared thermography is a widely used technique in the field of nondestructive testing. The subsurface defects produce non-uniform heat dissipation and this phenomenon is captured by an infrared camera. The phase image gives a prominent description of the defects which are not visible in the captured image sequence. The effect of non-uniform heating and the variation in surface emissivi...
متن کاملMicrowave Imaging of Subsurface Defects in Coated Metallic Structures Using Small Ring Resonators
Microwave testing has the advantage of detecting surface and sub-surface flaws and anomalies under coatings, paint or dirt. Thus, major application of microwave sensors is imaging to determine the shape, size, and location of buried flaws using scattered field measurements. A typical microwave system consists of transmitting and receiving antennas and requires that both sides of the material un...
متن کاملShort-pulse electromagnetic scattering from arbitrarily oriented subsurface ordnance
A rigorous method-of-moments (MoM) analysis is used to model wide-band scattering from general three-dimensional perfectly conducting objects buried in a lossy layered medium. Here, we focus on ordnance buried in a half space (soil). The time-domain fields scattered from a tilted antitank mine are examined in detail as a function of polarization and observation position.
متن کاملDouble Pulse Infrared Thermography
0. Abstract In this paper we propose a simple enhancing protocol for pulsed infrared thermography. The method is based on stimulating the specimen with two heating pulses separated by a short time interval delta. This approach was tested on several specimens of low and high thermal diffusivity and showed to provide higher thermal contrasts when an optimum interval delta is chosen. The observed ...
متن کاملNondestructive Evaluation of Plexiglas Materials Using Lock-in and Pulse Phase Infrared Thermography
− Lock-in and pulse phase infrared thermography measurement techniques have been exploited for quantitative assessment of subsurface defects in a reference specimen made of Plexiglas. Radiometric thermal images were post-processed using a contrast approach in the frequency domain, allowing defect depth location to be resolved with a relative combined standard uncertainty of about 7% for thickne...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Sciences
سال: 2016
ISSN: 2076-3417
DOI: 10.3390/app6120389