Snap-through transition of buckled graphene membranes for memcapacitor applications
نویسندگان
چکیده
منابع مشابه
Buckled Membranes for Microstructures
Based on energy variation methods we calculated the deflection of membranes under the combined load of an external pressure and an internal lateral stress. A lateral load gives rise to buckling once a critical load is exceeded. The combination of transversal loads and lateral loads changes the properties of the membrane (and other structures) in the vicinity of the buckling load: The membrane d...
متن کاملSnap-Through Instability of Graphene on Substrates
We determine the graphene morphology regulated by substrates with herringbone and checkerboard surface corrugations. As the graphene-substrate interfacial bonding energy and the substrate surface roughness vary, the graphene morphology snaps between two distinct states: (1) closely conforming to the substrate and (2) remaining nearly flat on the substrate. Since the graphene morphology is stron...
متن کاملDetermination of the bending rigidity of graphene via electrostatic actuation of buckled membranes.
Classical continuum mechanics is used extensively to predict the properties of nanoscale materials such as graphene. The bending rigidity, κ, is an important parameter that is used, for example, to predict the performance of graphene nanoelectromechanical devices and also ripple formation. Despite its importance, there is a large spread in the theoretical predictions of κ for few-layer graphene...
متن کاملBuckled circular monolayer graphene: a graphene nano-bowl.
We investigate the stability of circular monolayer graphene subjected to a radial load using non-equilibrium molecular dynamics simulations. When monolayer graphene is radially stressed, after some small circular strain (∼0.4%) it buckles and bends into a new bowl-like shape. Young's modulus is calculated from the linear relation between stress and strain before the buckling threshold, which is...
متن کاملSilicon Active Microvalves Using Buckled Membranes for Actuation
Design considerations and experiments have been made for obtaining a new type of active microvalves using silicon buckled membranes. The properties of the buckled membranes permitting to obtain high deflections and to actuate them more convenient are demonstrated. A thermal actuation using an aluminium ring layer heated with a polysilicon resistor is analysed. The polysilicon and the aluminium ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Reports
سال: 2018
ISSN: 2045-2322
DOI: 10.1038/s41598-018-21205-3