Solidification cracking susceptibility of ferritic stainless steels using Modified Varestraint Transvarestraint (MVT) method

Hydrogen-Induced Delayed Cracking in TRIP-Aided Lean-Alloyed Ferritic-Austenitic Stainless Steels

Susceptibility of three lean-alloyed ferritic-austenitic stainless steels to hydrogen-induced delayed cracking was examined, concentrating on internal hydrogen contained in the materials after production operations. The aim was to study the role of strain-induced austenite to martensite transformation in the delayed cracking susceptibility. According to the conducted deep drawing tests and cons...

Thermal Fatigue Behavior of 400 Series Ferritic Stainless Steels

In this study, thermal fatigue properties of 400 series ferritic stainless steels have been evaluated in the temperature ranges of 200-800C and 200-900C. Systematic methods for control of temperatures within the predetermined range and measurement of load applied to specimens as a function of temperature during thermal cycles have been established. Thermal fatigue tests were conducted under ful...

Type IV cracking in ferritic power plant steels

There have been concerted world wide efforts to develop steels suitable for use in efficient fossil fired power plants. Ferritic alloys containing between 9 and 12 wt-% chromium are seen as the most promising materials in this respect, especially for thick walled components such as headers and the main steam pipe in boilers. However, the performance of the improved steels has often not been rea...

Delayed Cracking of Metastable Austenitic Stainless Steels after Deep Drawing

In metastable austenitic stainless steels, strain-induced martensitic transformation during plastic deformation enhances work hardening of the material, increasing its strength and in some cases also ductility.1,2) The presence of α’-martensite, however, may increase the susceptibility of these materials to hydrogen embrittlement phenomena, for example delayed cracking.3–6) Delayed cracking can...

Effect of grain size on solidification cracking susceptibility of type 347 stainless steel during laser welding