Special Issue on Soot Dynamics in Internal Combustion Engines

Internal Combustion Engines

Ethanol Internal Combustion Engines

Ethanol Internal Combustion Engines HIGHLIGHTS PROCESS AND TECHNOLOGY STATUS – The use of biofuels (e.g. bio-ethanol and biodiesel) in the transport sector can save significant amounts of fossil fuels and greenhouse gas (GHG) emissions. Internal combustion engines (ICEs) can run on bio-ethanol manufactured from biomass or waste through biochemical processes. Agricultural feedstock such as sugar...

Transient combustion control of internal combustion engines

This thesis addresses the problem of combustion control for automotive engines. A method is proposed to complement existing controllers, which use lookup tables based on steady-state operation. During transients, the new control method adjusts fast control variables (ignition or injection time) to compensate for deviations in the cylinder initial conditions from their optimal values due to the ...

Conductometric Sensor for Soot Mass Flow Detection in Exhausts of Internal Combustion Engines

Soot sensors are required for on-board diagnostics (OBD) of automotive diesel particulate filters (DPF) to detect filter failures. Widely used for this purpose are conductometric sensors, measuring an electrical current or resistance between two electrodes. Soot particles deposit on the electrodes, which leads to an increase in current or decrease in resistance. If installed upstream of a DPF, ...

Heat Transfer in Internal Combustion Engines

A heat transfer model has been developed that uses quasi-steady heat flux relations to calculate the heat transfer from combustion gases through the cylinder wall to the coolant in an internal combustion engine. The treatment of convective heat transfer accounts for the physical problems of rotating and impinging axial flow inside the engine cylinder. The radiative heat transfer includes gas ra...