Spray Measurements and Numerical Analysis on an Impinging Jet Injector
نویسندگان
چکیده
منابع مشابه
PIV measurements of an air jet impinging on an open rotor-stator system
The current work experimentally investigates the flow characteristics of an air jet impinging on an open rotor-stator system with a low non-dimensional spacing, G = 0.02, and with a very low aspect ratio, e/D = 0.25. The rotational Reynolds numbers varied from 0.33 × 10 to 5.32 × 10, while the jet Reynolds numbers ranged from 17.2×10 to 43×10. Particle image velocimetry (PIV) measurements were ...
متن کاملNumerical study of a confined slot impinging jet with nanofluids
BACKGROUND Heat transfer enhancement technology concerns with the aim of developing more efficient systems to satisfy the increasing demands of many applications in the fields of automotive, aerospace, electronic and process industry. A solution for obtaining efficient cooling systems is represented by the use of confined or unconfined impinging jets. Moreover, the possibility of increasing the...
متن کاملNumerical simulation of liquid-layer breakup on a moving wall due to an impinging jet
Jet-wiping is a hydrodynamic method for controlling the liquid film thickness in a coating process. In industrial conditions, the jet is generally turbulent. When the jet wipes a liquid film, it usually induces violent film instability called splashing. The instability is characterized by the ejection of droplets from the runback flow. Consequently, it can degrade the final coating quality sinc...
متن کاملHeat Transfer of an Impinging Jet on a Plane Surface
Abstract—A cold, thin film of liquid impinging on an isothermal hot, horizontal surface has been investigated. An approximate solution for the velocity and temperature distributions in the flow along the horizontal surface is developed, which exploits the hydrodynamic similarity solution for thin film flow. The approximate solution may provide a valuable basis for assessing flow and heat transf...
متن کاملExperimental study and numerical simulation of three dimensional two phase impinging jet flow using anisotropic turbulence model
Hydrodynamic of a turbulent impinging jet on a flat plate has been studied experimentally and numerically. Experiments were conducted for the Reynolds number range of 72000 to 102000 and a fixed jet-to-plate dimensionless distance of H/d=3.5. Based on the experimental setup, a multi-phase numerical model was simulated to predict flow properties of impinging jets using two turbulent models. Mesh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 2004
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.70.1711