Strength Characteristics Based on Curing Method and Curing Time of Inorganic Binder Matrix of Ternary System
نویسندگان
چکیده
منابع مشابه
Investigating the Effect of Curing Agent and Casting Temperature on Pot Life of Binder System Based on HTPB
Effect of temperature and curing agent type parameters on rheological behavior of binder system based on Hydroxyl terminated Polybutadiene (HTPB) is important in the aspect of production for medium and large-size grains. In this research, the effect of casting temperature 40, 50 and 60 ºC) and chemical structure of curing agents (TDI, IPDI and HDI) on rheological behavior of a binder system bas...
متن کاملStrength Characteristics of Self-curing Concrete
Today concrete is most widely used construction material due to its good compressive strength and durability. Depending upon the nature of work the cement, fine aggregate, coarse aggregate and water are mixed in specific proportions to produce plain concrete. Plain concrete needs congenial atmosphere by providing moisture for a minimum period of 28 days for good hydration and to attain desired ...
متن کاملInfluence of Curing Time and Water Content on Unconfined Compressive Strength of Sand Stabilized Using Epoxy Resin
Improvement and stabilization of soils are widely used to improve the physical and mechanical properties of sandy soils. Despite the abundance of researchers that have been conducted on this topic to date, most of them have focused on dry soil. The effects of the existing water in the soil and different curing durations (curing environment) have not been investigated. In this study, different p...
متن کاملCuring efficiency of various resin-based materials polymerized through different ceramic thicknesses and curing time
PURPOSE The aim of this in vitro study was to examine the curing efficiency of various resin-based materials polymerized through ceramic restorations with 3 different thicknesses. Curing efficiency was evaluated by determining the surface microhardness (VHN) of the resin specimens. MATERIALS AND METHODS Four kinds of resin materials were used. Z350 (3M ESPE Filtek™ Z350: A2 Shade), Z250 (3M E...
متن کاملEffect of composite shade, curing time and mode on temperature rise of silorane and methacrylate- based composite resins
Introduction: The present study was performed to evaluate the effects of light-curing modes and shades of methacrylate and silorane-based composite resins on temperature rise during polymerization of composite resins. Materials &Methods: In this in vitro study, ninety composite samples with two types of composite resin - methacrylate-based and a low-shrinkage silorane-based were prepared, in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Asian Journal of Chemistry
سال: 2015
ISSN: 0970-7077,0975-427X
DOI: 10.14233/ajchem.2015.19490