Strengthening and toughening mechanisms of Mg matrix composites reinforced with specific spatial arrangement of in-situ TiB2 nanoparticles
نویسندگان
چکیده
منابع مشابه
Comparative Analysis Of Aluminium Metal Matrix Composites Reinforced With TiC And TiB2 Using Stir Casting Process
Composite materials are playing major and vital role in various sectors especially in aeronautical, defence and automotive sectors. It is preferable because of obtaining unique characteristics such as high specific strength, high stiffness, high corrosion resistance and low density. In the present work deals with the influence of Titanium carbide and Titanium boride reinforcements in different ...
متن کاملFabrication of in situ TiC reinforced aluminum matrix composites
In the present work, the room and elevated temperature mechanical behavior of Al/TiC, high-strength Al-Si/TiC and the elevated temperature-resistant Al-Fe(-V-Si)/TiC composites has been evaluated. The microstructural characteristics of ingot metallurgy (IM) or rapid solidification (RS) Al-Si/TiC and Al-Fe(-V-Si)/TiC composites could be thought of as a combination of the related alloy matrix mic...
متن کاملFabrication of in-situ grown graphene reinforced Cu matrix composites
Graphene/Cu composites were fabricated through a graphene in-situ grown approach, which involved ball-milling of Cu powders with PMMA as solid carbon source, in-situ growth of graphene on flaky Cu powders and vacuum hot-press sintering. SEM and TEM characterization results indicated that graphene in-situ grown on Cu powders guaranteed a homogeneous dispersion and a good combination between grap...
متن کاملStudy on Machining Parameters of TiB2 Reinforced Aluminum 6063 Composites
In this experimental study, three TiB2/Al metal matrix composites (MMCs) with 40 μm in mean size were produced using a melt stirring squeeze casting route. Test was carried out to find the parameters influencing surface roughness (Ra) and material removal rate (MRR) on machining the TiB2 reinforced Al-6063 composite materials. The orthogonal array, the signal-to-noise ratio, and analysis of var...
متن کاملPilot in-Situ Production of AL-TiB2 and AL-ZrB2 Composites Using Reactive Slag
In this research work, the possibility of semi industrial production of Al-TiB2 and Al-ZrB2 composites, using reactive slag in a flame furnace have been investigated. For this purpose, commercial pure aluminum and powder mixture of TiO2 (ZrO2) , KBF4 and Na3AlF6 were used. The results showed that using a proper ratio of slag forming materials as well as proper amounts of the above-mentioned com...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part B: Engineering
سال: 2020
ISSN: 1359-8368
DOI: 10.1016/j.compositesb.2020.108174