Structural properties of ZnO layers deposited on glass substrates by PECVD
نویسندگان
چکیده
منابع مشابه
Electrical, optical and structural properties of ZnO nanorods thin films deposited over ZnO substrates
ZnO thin films with grain morphology were obtained over glass substrates using the sol–gel method; these films were used as substrates to grow ZnO nanorods using chemical bath deposition (CBD) technique. The transmittance percentage of two films was over 85% and the electrical resistivity decreased when ZnO nanorods were grown over the ZnO thin film with grain morphology. A laser is incident at...
متن کاملMorphological, structural and photoresponse characterization of ZnO nanostructure films deposited on plasma etched silicon substrates
ZnO nanostructure films were deposited by radio frequency (RF) magnetron sputtering on etched silicon (100) substrates using dry Ar/SF6 plasma, at two etching times of 5 min and 30 min, and on non etched silicon surface. Energy dispersive X-ray (EDX) technique was employed to investigate the elements contents for etched substrates as well as ZnO films, where it is found to be stoichiometric. Su...
متن کاملCharacterization of polymer-like thin films deposited on silicon and glass substrates using PECVD method
Polymer-like thin films have been deposited on glass and silicon substrates at temperatures in the range 300–673 K, by a plasma enhanced chemical vapor deposition (PECVD) method using thiophene (C H S) as a precursor. A power with radio 4 4 frequency (13.56 MHz) was applied for the ignition of the plasma, and hydrogen and Ar(argon) were used as the bubbler and the carrier gases, respectively. I...
متن کاملSuperconducting and structural properties of plasma sprayed Y-Ba-Cu-O layers deposited on metallic substrates*
The properties of plasma sprayed Y-Ba-Cu-O coatings deposited on metallic substrates are studied. Stainless steel, nickel steels and pure nickel are used as substrate. Y-Ba-Cu-O deposited on stainless steel and nickel steel reacts with the substrate. This interaction can be suppressed by using an yttria-stabilized zirconia (YsZ) diffusion barrier. However, after heat treatment the Y-Ba-Cu-O lay...
متن کاملA Study of ZnO Buffer Layer Effect on Physical Properties of ITO Thin Films Deposited on Different Substrates
The improvement of the physical properties of Indium Tin Oxide (ITO) layers is quite advantageous in photovoltaic applications. In this study the ITO film is deposited by RF sputtering onto p-type crystalline silicon (c-Si) with (100) orientation, multicrystalline silicon (mc-Si), and glass substrates coated with ZnO and annealed in vacuum furnace at 400°C. Electrical, optical, structural a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2012
ISSN: 1742-6596
DOI: 10.1088/1742-6596/356/1/012024