Studies on Silver Soldering of Super-elastic Ti-Ni Alloy Wire to Co-Cr Alloy Wire.

[Fundamental studies on superelastic Ni-Ti alloy for wire clasp].

In order to apply Ni-Ti superelastic alloy to wire clasp in dentistry, the bending characteristics and the shape memory treatment of the wire were investigated. The wire cooled in iced water was more easily bent than that stored at room temperature . In both conditions, however, most of the wire specimens were broken by bending before the radius of curvature became less than three times the dia...

Diffraction studies on Ni-Co and Ni-Cr alloy thin films

Effect of soldering techniques and gap distance on tensile strength of soldered Ni-Cr alloy joint

PURPOSE The present study was intended to evaluate the effect of soldering techniques with infrared ray and gas torch under different gap distances (0.3 mm and 0.5 mm) on the tensile strength and surface porosity formation in Ni-Cr base metal alloy. MATERIALS AND METHODS Thirty five dumbbell shaped Ni-Cr alloy specimens were prepared and assigned to 5 groups according to the soldering method ...

Bending Property of Super-Elastic Ti-Ni Alloy Dental Castings with Different Heat Treatments

Bending property of Ti-Ni alloy dental castings was evaluated in comparison with that of Co-Cr alloy in a cantilever test. Heat treatment effect on the bending property was also investigated in relation to phase transformation. Ti-50.85Ni (mol%) alloy was used, and the shape of bending test specimens was half-rounded in cross section, 2.0mm in diameter. The bending test was carried out at 310K....

Dental casting of superelastic Ni-Ti alloy.

Rods of Ni-43.5wt% Ti alloy were prepared under various casting conditions. Specimens which were melted in a cordierite crucible and cast in a phosphate-bonded investment mold had less strength and elongation than those melted in a copper crucible and cast in a phosphate-bonded investment mold. All castings exhibited superelasticity at room temperature. The upper limit of recoverable strain was...