Study on Displacement-based Design Method for Structures with Buckling Restrained Brace: Security and Seismic Design
نویسندگان
چکیده
منابع مشابه
Performance-based Plastic Design Method for Buckling- Restrained Braced Frames
This paper presents the key design points of buckling-restrained braced frames (BRBFs) by using the performance-based plastic design (PBPD) methodology. This method is based on energy-work balance concept and uses pre-selected target drift and yield mechanism as design criteria. Based on multi-mode pushover and time-history analyses, a simple equation is developed for computing yield drift rati...
متن کاملDisplacement–Based Seismic Design of Structures
The concept of designing structures to achieve a specified performance limit state defined by strain or drift limits was first introduced, in New Zealand, in 1993. Over the following years, and in particular the past five years, an intense coordinated research effort has been underway in Europe and the USA to develop the concept to the stage where it is a viable and logical alternative to curre...
متن کاملAn Experimental Study on Seismic Performance of Steel Truss Coupling Beams with Buckling-restrained Brace
Through the pseudo-static test on the steel truss coupling beams with buckling-restrained brace, the bearing capacity, deformation capacity, hysteresis curve, skeleton curve, ductility, Energy Dissipation and stiffness degradation of such coupling beam are understood. The test results show that the steel truss coupling beams with buckling-restrained brace is characterized by bigger bearing capa...
متن کاملNew Lateral Force Distribution for Seismic Design of Structures Based on Seismic Demand Ratio
The design of earthquake-resistant buildings starts with defining the maximum lateral earthquake forces or their resultant. The amount of these forces depends on various factors, including coefficient of system behavior which depends on overstrength and its ductility. In this study, a method is presented for designing an earthquake-resistant system in which the distribution of lateral forces is...
متن کاملTowards Displacement-Based Seismic Design of Modern Unreinforced Masonry Structures
Unreinforced masonry (URM) structures are known to be rather vulnerable to seismic loading. Modern URM buildings with reinforced concrete (RC) slabs might, however, have an acceptable seismic performance for regions of low to moderate seismicity. In particular in countries of moderate seismicity it is often difficult to demonstrate the seismic safety of modern URM buildings by means of force-ba...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Security and Its Applications
سال: 2016
ISSN: 1738-9976,1738-9976
DOI: 10.14257/ijsia.2016.10.10.21