Study on Performance of the Thermoelectric Cooling Device with Novel Subchannel Finned Heat Sink

نویسندگان

چکیده

The thermoelectric refrigeration system is an application of the Peltier effect, and good performance dependent on effective heat dissipation performance. To enhance cooling system, this paper designs a new type finned sink, which does not change overall size system. under fin tested by experiments various conditions. During experiment, wind speed, temperature hot cold side TEC, power consumption fan, other parameters were directly recorded through measuring instrument. results show that use sinks can improve COP Within scope study, thermal resistance fins be reduced 42.6%, value increased 22.8%. In addition, increasing speed further reduce temperature. research range, lowest reach ?8.25 °C, but consumed fan 166% conventional sink device.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

wuthering heights and the concept of marality/a sociological study of the novel

to discuss my point, i have collected quite a number of articles, anthologies, and books about "wuthering heights" applying various ideas and theories to this fantastic story. hence, i have come to believe that gadamer and jauss are rightful when they claim that "the individaul human mind is the center and origin of all meaning," 3 that reading literature is a reader-oriented activity, that it ...

15 صفحه اول

Experimental Investigation on Thermal Performance of Cooling System Using Thermoelectric Module Integrated with Heat Pipe

ARTICLE INFO Cooling of electronics component is one of the major challenges faced by thermal engineers. In recent years, a significant increase in microprocessor power dissipation coupled with CPU size has resulted in an increase in heat fluxes. Microprocessor heat fluxes have also increased for many commercial applications. Therefore, thermal management is becoming one of most challenging iss...

متن کامل

Numerical Studies on the Performance of Finned-Tube Heat Exchanger

Finned-tube heat exchangers are predominantly used in space conditioning systems, as well as other applications requiring heat exchange between two fluids. The design of finned-tube heat exchangers requires the selection of over a dozen design parameters by the designer such as tube pitch, tube diameter, tube thickness, etc... Finned-tube heat exchangers are common devices; however, their perfo...

متن کامل

Development of heat sink with ionic wind for LED cooling

A heat sink with ionic wind has been developed in this study for a new cooling device of a Light Emitting Diode (LED). The characteristics of the ionic wind using wire to parallel-plate-electrodes were analyzed using the Computational Fluid Dynamics (CFD) technique suggested in this study. Also, the cooling performance of the heat sink applied by the impinging flow of the ionic wind was investi...

متن کامل

Numerical Optimization of Pin-Fin Heat Sink with Forced Cooling

This study presents the numerical simulation of optimum pin-fin heat sink with air impinging cooling by using Taguchi method. 9 L ( 4 3 ) orthogonal array is selected as a plan for the four design-parameters with three levels. The governing equations are discretized by using the control-volume-based-finite-difference method with a power-law scheme on the non-uniform staggered grid. We solved th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Energies

سال: 2021

ISSN: ['1996-1073']

DOI: https://doi.org/10.3390/en15010145