Study on the Bending Fatigue Strength of Gears : 2nd Report, Bending Fatigue Properties under Reverse Loading Conditions
نویسندگان
چکیده
منابع مشابه
Fatigue strength of bovine articular cartilage-on-bone under three-point bending: the effect of loading frequency
BACKGROUND The objective of this study was to determine the influence of loading frequency on the failure of articular cartilage-on-bone specimens under three-point bending. METHODS In this study, cyclic three-point bending was used to introduce failure into cartilage-on-bone specimens at varying loading frequencies. Sinusiodally varying maximum compressive loads in the range 40-130 N were ap...
متن کاملAssessment of different methods for fatigue life prediction of steel in rotating bending and axial loading
Generally, fatigue failure in an element happens at the notch on a surface where the stress level rises because of the stress concentration effect. The present paper investigates the effect of a notch on the fatigue life of the HSLA100 (high strength low alloy) steel which is widely applicable in the marine industry. Tensile test was conducted on specimens and mechanical properties were obtain...
متن کاملBending Fatigue Failures of Compressor Valve Reeds
Bending fatigue failures OI cantilever type suction valve reeds occurred under operating conditions in a semi-hermetic refrigerant compressor during field trials. The finite element method (FEM) was applied to predict both the static and dynamic displacements and the resultant stresses of the reeds. The dynamic stresses in the location of the fracture exceeded the fatigue limit of the reed stee...
متن کاملBending fatigue of hybrid composite rods
The flexural fatigue behavior of hybrid composite rods comprised of unidirectional carbon and glass fibers was investigated. Damage was evaluated by monitoring stiffness loss as a function of cycles, and bending fatigue failure was defined in terms of strength retention. The acoustic emission technique and microscopic examination were used to characterize damage progression and failure mechanis...
متن کاملBending Fatigue Failures in Valve Steel
In the present paper the effect of defects (viz. pits, gouges and oxide inclusions) will be reported. Although certain defects were uniformly distributed over the specimen surface, the majority of all fractures started in the edge region. An explanation to this behaviour is presented in terms of stress enhancement in the edge regions due to edge deflections.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1966
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.32.143