Study on the Steel Rail Rolling Contact Stress with Consideration of Initial Residual Stress
نویسندگان
چکیده
منابع مشابه
تاثیر برنامه خودمدیریتی بر افسردگی، اضطراب و استرس بیماران سکته قلبی the effect of self management program on depression anxiety and stress of patients with myocardial infraction
چکیده : هدف :.این پژوهش با هدف تعیین تاثیر برنامه خودمدیریتی بر افسردگی، اضطراب و استرس بیماران سکته قلبی ا نجام شد. روش مطالعه : این پژوهش یک مطالعه تجربی دو گروهه ، قبل و بعد است که در سال 1389 در بیمارستان امام رضا (ع) کرمانشاه بر روی 60 مددجوی مبتلا به بیماری سکته قلبی ا نجام شد . نمونه ها به روش در دسترس جمع آوری و به روش بلوکهای تصادفی در دو گروه شاهد و آزمون تخصیص داده شدند . به مدت یک...
15 صفحه اولI / RESIDUAL STRESS DISTRIBUTION IN FeAl WELD OVERLAY ON STEEL
Neutron diffraction was used to measure the residual stress distribution in an FeAl weld overlay on steel. It was found that the residual stresses accumulated during welding were essentially removed by the post-weld heat treatment that was applied to the specimen; most residual stresses in the specimen developed during cooling following the post-weld heat treatment. The experimental data were c...
متن کاملStudy on Evaluation of Residual Phase Stress of the Dual Phase Stainless Steel
In this study , we measured residual stress in ground layer of ( CY+ r )dual phase stainless steel by X-ray diffraction. In addition, the influence of changing depth of cut on residual stress was investigated. It was found that residual stress in the a! phase was dependent on depth of cut, while the stress in Y phase was not affected by depth of cut. As a results of stress measurement under app...
متن کاملMeasuring of Residual Stress in TIG Welding of the 304 Stainless Steel by Ultrasonic Method
In this research, the effect of different welding parameters on residual stress and microstructure of the weld region, as well as the comparison of two methods of measuring residual stress using critical fracture longitudinal wave method and preformation method have been investigated. For this purpose, the taguchi DOE methodology is used as a statistical method to optimize four parameters of pu...
متن کاملInfluence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components
Hot forging is a common manufacturing process for the production of large quantities of engineering components. Residual stresses are developed in forged components as a result of various aspects of the manufacturing process, including subsequent cooling, and heat treatment. Residual stresses can significantly affect the deformation and fatigue failure of materials. Hot forged EN15R steel bars ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2015
ISSN: 2261-236X
DOI: 10.1051/matecconf/20152203018