Study thermo-mechanical properties of polyester composite reinforced by ceramic particles, SiC

Microstructure and Mechanical Properties of Mg-5Nb Metal-Metal Composite Reinforced with Nano SiC Ceramic Particles

In this work, a Mg-5Nb metal–metal composite was reinforced with nano SiC (SiCn) ceramic reinforcement of varying volume fractions, using the disintegrated melt deposition technique. The extruded Mg-5Nb-SiCn composites were characterized for their microstructure and mechanical properties. Based on the results obtained, it was observed that the volume fraction of nano-SiC reinforcement played an...

Exact Solution for Electro- Thermo- Mechanical Behavior of Composite Cylinder Reinforced by BNNTs under Non- Axisymmetric Thermo- Mechanical Loads

In this research, static stresses analysis of boron nitride nano - tube reinforced composite (BNNTRC) cylinder made of poly - vinylidene fluoride (PVDF) subjected to non - axisymmetric thermo - mechanical loads and applied voltage is developed. The surrounded elastic medium is modelled by Pasternak foundation. Composite structure is modeled based on piezoelectric fiber reinforced composite (PFR...

MECHANICAL PROPERTIES OF DENTAL COMPOSITE MATERIALS REINFORCED WITH MICRO AND NANO-SIZE Al2O3 FILLER PARTICLES

Abstract: Composite specimens were prepared by dispersion of various amounts of nano-sized Al2O3 fillers in a monomer system containing 60% Bis-GMA and 40% TEGDMA. For comparative purposes, composite samples containing micrometer size Al2O3 fillers were also prepared following the same procedure. The mechanical properties of the light- cured samples were assessed by three-point flexural strengt...

Mechanical Properties of SiC Fiber- Reinforced Reaction-Bonded Si3N4 Composites

exact solution for electro- thermo- mechanical behavior of composite cylinder reinforced by bnnts under non- axisymmetric thermo- mechanical loads

in this research, static stresses analysis of boron nitride nano - tube reinforced composite (bnntrc) cylinder made of poly - vinylidene fluoride (pvdf) subjected to non - axisymmetric thermo - mechanical loads and applied voltage is developed. the surrounded elastic medium is modelled by pasternak foundation. composite structure is modeled based on piezoelectric fiber reinforced composite (pfr...