Superplastic-Like Behavior in Medium Grained and Single Crystalline Al-Mg Solid Solution Alloys

The Texture Behavior of Al-Mg-Sc Alloys

Three alloys of Al-Mg with and without scandium are cold worked at different percentage and then annealed. The texture behavior of the alloys is studied by X-ray diffraction technique. The X-ray diffraction analysis is done using a PHILIPS PW1830 diffractometer with Cu-Kα radiation. It is found that the addition of scandium in Al-6Mg alloy influences the development of texture. The cube texture...

EXPERIMENTALl ANALYSIS OF PARTITION COEFFICIENT IN Al-Mg ALLOYS

Because the partition coefficient is one of the most important parameters affecting microsegregation, the aim of this research is to experimentally analyse the partition coefficient in Al-Mg alloys. In order to experimentally measure the partition coefficient, a series of quenching experiments during solidification were carried out. For this purpose binary Al-Mg alloys containing 6.7 and 10.2 w...

The Electrochemical Behavior of Al Alloys in NaCl Solution in the Presence of Pyrazole Derivative

This paper studies the corrosion inhibition of Al-Mg alloy system in 0.5 mol/dm3 NaCl solution in the presence of pyrazole derivative using potentiodynamic polarization and linear polarization method. The inhibition efficiency as a function of concentration and temperature was investigated. From the polarization curves, it can be concluded that the pyrazole derivative be...

THERMAL ANALYSIS AND KINETICS OF THE PRECIPITATION IN WROUGHT Al-Mg, Al-Mg-ScAND Al-Mg-Sc-Me (Me=Zr, Ti) ALLOYS

Precipitation behaviour of wrought Al-6Mg alloys with ternary scandium and quaternary zirconium and titanium has been studied. Hardness measurements and resistivity studies are employed to assess the precipitation behaviour of scandium doped Al-6Mg alloy without or with quaternary additions of zirconium and titanium. Further, the kinetics of precipitations are studied by differential scanning c...

Precipitation Hardening of Al–Si–Mg Alloys