Surface fluorination treated indium-based quantum dots as a nonlinear saturable absorber for a passive Q-switched 1.0 μm laser
نویسندگان
چکیده
InP/ZnSe/ZnS QDs with surface fluorination treatment were fabricated and their nonlinear saturable absorption properties explored. Passive Q-switching of diode-pumped Nd:YVO 4 near-infrared laser at 1064 nm (∼1.0 μm) using InP-HF as absorber (SA) is observed.
منابع مشابه
A passively Q-switched Ho:YVO4 Laser at 2.05 μm with Graphene Saturable Absorber
We report a passively Q-switched Ho:YVO4 laser pumped at 1.94 μm with multilayer graphene as a saturable absorber. At the absorbed pump power of 9.3 W, the maximum average output power of 2.2 W was obtained in Ho:YVO4 laser with minimum pulse width of 265.2 ns and pulse repetition rate of 131.6 kHz at 2052.1 nm. In addition, a beam quality factor of M2~1.7 was measured at the maximum output lev...
متن کاملResonantly pumped 1.645 μm high repetition rate Er:YAG laser Q-switched by a graphene as a saturable absorber.
A fiber laser resonantly pumped 1.645 μm passively Q-switched Er:YAG laser is reported. Graphene on a silicon carbide was used as the saturable absorber for the Q-switching. The pulse energy of the 1.645 μm Q-switched Er:YAG laser was 7.05 μJ, with a pulse repetition rate of 35.6 kHz and an average output power of 251 mW.
متن کاملSemiconductor saturable absorber mirror passively Q-switched 2.97 μm fluoride fiber laser
A diode-cladding-pumped mid-infrared passively Q-switched Ho-doped fluoride fiber laser using a reverse designed broad band semiconductor saturable mirror (SESAM) was demonstrated. Nonlinear reflectivity of the SESAM was measured using an in-house Yb-doped mode-locked fiber laser at 1062 nm. Stable pulse train was produced at a slope efficient of 12.1% with respect to the launched pump power. M...
متن کامل1.06 μm Q-switched ytterbium-doped fiber laser using few-layer topological insulator Bi₂Se₃ as a saturable absorber.
Passive Q-switching of an ytterbium-doped fiber (YDF) laser with few-layer topological insulator (TI) is, to the best of our knowledge, experimentally demonstrated for the first time. The few-layer TI: Bi₂Se₃ (2-4 layer thickness) is firstly fabricated by the liquid-phase exfoliation method, and has a low saturable optical intensity of 53 MW/cm² measured by the Z-scan technique. The optical dep...
متن کاملExperimental Study of a Flash-lamp Pumped Passively Q-Switched Nd:YAG Laser Using Cr4+:YAG Saturable Absorber
This paper deals with the experimental results of a xenon flash-lamp pumped passively Q-switched Nd:YAG laser using Cr4+:YAG saturable absorber. The need of a laser cavity to be integrated into a time-of-flight laser range finder is of great interest as an experimental investigation of several laser resonators. Two types of laser resonator, with different lengths, have been studied: the flat-fl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials advances
سال: 2022
ISSN: ['2633-5409']
DOI: https://doi.org/10.1039/d2ma00442a