Surface Roughness Investigation and Stress Modeling by Finite Element on Orthogonal Cutting of Copper
نویسندگان
چکیده
منابع مشابه
Finite Element Modeling to Verify Residual Stress in Orthogonal Machining
The aim of this thesis paper, to create a numerical model to examine the residual stresses induced by orthogonal machining in the finished work piece and the model is validated by comparing with experimental result. The finite element method is used to simulate and analyze the residual stresses induced by a orthogonal metal cutting process. A Dynamics explicit time integration technique with Ar...
متن کاملthe effect of tool rake angle and cutting speed on cutting force during broaching process by using finite element modeling
0
متن کاملinvestigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem
در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...
An Investigation of the Seismic Interaction of Surface Foundations and Underground Cavities Using Finite Element Method
In this study, the seismic interaction of surface foundations and underground cavities was investigated. For this purpose, a parametric study of geometric dimensions of the foundation and cavity, their location, and the effect of the interaction between surface foundations and underground cavities was evaluated. The variable parameters include the ratio of the overburden height to the foundatio...
متن کاملSurface Roughness Investigation of the Cutting Edge of the High Precision Cutting Tools Enabled by Micro and Nanometrological Measurements
The manufacturing technology of milling, drilling and turning tools have demands of new developing markets as well as quality and lifetime aspects of the machining. In order to achieve the high precision required by machining, the structure and form of the cutting edge of the tools must be investigated to provide the most influential properties. Correlation between the tool wear on the cutting ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2018
ISSN: 2075-4701
DOI: 10.3390/met8060418