Tape casting system for ULTCCs to fabricate multilayer and multimaterial 3D electronic packages with embedded electrodes
نویسندگان
چکیده
منابع مشابه
simulation and design of electronic processing circuit for restaurants e-procurement system
the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...
15 صفحه اولAnalysis of MEMS and Embedded Components in Multilayer Packages using FDTD/MRTD for System-on-Package Applications
The FDTD and MRTD full-wave numerical techniques are applied to the modeling and analysis of embedded components, such as MEMS and integrated antennas, in multilayer packages. Preliminary design rules are derived for minimized-crosstalk transmission lines, for a wideband compact transition and for an ultra-thin MEMS switch that can be used in practical tuning applications. In addition, the effe...
متن کاملTAPE CASTING OF NON-AQUEOUS HYDROXYAPATITE SLIPS
Thin sheets of hydroxyapatite were fabricated by tape casting process. The non-aqueoustape casting formulation was optimized by adjusting the concentration of organic additivesspecially those of binder and plasticizer in the slurry. The optimized slurry was cast on a glasscarrier using a designed laboratory scale doctor blade. Following a binder removal stage, thetapes were sintered at differen...
متن کامل3D Printed Multimaterial Microfluidic Valve
We present a novel 3D printed multimaterial microfluidic proportional valve. The microfluidic valve is a fundamental primitive that enables the development of programmable, automated devices for controlling fluids in a precise manner. We discuss valve characterization results, as well as exploratory design variations in channel width, membrane thickness, and membrane stiffness. Compared to prev...
متن کاملUltrasonic deagglomeration of AI2O3 and BaTiO3 for tape casting
Ultrasonic agitation is a very efficient method for deagglomeration and dispersion of ceramic slurries (alumina and barium titanate). The influence of parameters such as acoustic power, temperature, and treatment duration on the dispersion efficiency has been studied. For
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the American Ceramic Society
سال: 2017
ISSN: 0002-7820
DOI: 10.1111/jace.14639