Temperature Compensation Method for Mechanical Base of 3D-Structured Light Scanners
نویسندگان
چکیده
منابع مشابه
Motion Compensation for Structured Light Sensors
In order for structured light methods to work outside, the strong background from the sun needs to be suppressed. This can be done with bandpass filters, fast shutters, and background subtraction. In general this last method necessitates the sensor system to be stationary during data taking. The contribution of this paper is a method to compensate for the motion if the system is moving. The key...
متن کاملUsing Physically Based Rendering to Benchmark Structured Light Scanners: Appendix
Although the simulator generates realistic images, we need to verify that the range scans we produce using the synthetic scanner contain artifacts similar to those acquired in real scans. A common operation performed when using binary coded patterns is the binarization process. This identifies each pixel as either lit or unlit. Our validation procedure, which is based on this binarization opera...
متن کاملAnalysis and Compensation for Lateral Chromatic Aberration in a Color Coding Structured Light 3D Measurement System
While color-coding methods have improved the measuring efficiency of a structured light three-dimensional (3D) measurement system, they decreased the measuring accuracy significantly due to lateral chromatic aberration (LCA). In this study, the LCA in a structured light measurement system is analyzed, and a method is proposed to compensate the error caused by the LCA. Firstly, based on the proj...
متن کاملUsing physically Based Rendering to Benchmark Structured Light Scanners
Structured light scanning is ubiquituous in 3D acquisition. It is capable of capturing high geometric detail at a low cost under a variety of challenging scene conditions. Recent methods have demonstrated robustness in the presence of artifacts due to global illumination, such as inter-reflections and sub-surface scattering, as well as imperfections caused by projector defocus. For comparing ap...
متن کاملStructured Light 3D Surface Reconstruction of Birds
In my research with the Lentink Lab, I am designing a system that will track the 3D surface of the wings of birds using stereoscopic vision implemented using a high speed projector and camera setup at 3000 Hz. In previous studies, laser scanning has been successfully used to map stationary objects [1], [2] and has also progressed for more rapid data collection [3], [4], but has never been used ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2020
ISSN: 1424-8220
DOI: 10.3390/s20020362