Testing of Zn-1.6Mg Alloy in Model Physiological Solution

Fretting properties of biodegradable Mg-Nd-Zn-Zr alloy in air and in Hank’s solution

Fretting is a significant cause for the failure of orthopedic implants. Currently, since magnesium and its alloys have been developed as promising biodegradable implant materials, the fretting behavior of the Mg alloys is of great research significance. In this study, a Mg-Nd-Zn-Zr alloy (hereafter, denoted as JDBM alloy) was selected as experimental material, and its fretting behaviors were ev...

Shape Memory Properties in Cu-Zn-Al Alloy

In this research a Cu-Zn-Al alloy is produced by melting the raw materials in an electric resistance furnace and then pouring it into a steel mould. The optimum way to achieve the final analysis in the hypo-eutectoid range is determined and the influence of the alloying element, Ti on the grain size and the shape memory properties of the samples are investigated. Solution treatment (done at 850...

Shape Memory Properties in Cu-Zn-Al Alloy

In this research a Cu-Zn-Al alloy is produced by melting the raw materials in an electric resistance furnace and then pouring it into a steel mould. The optimum way to achieve the final analysis in the hypo-eutectoid range is determined and the influence of the alloying element, Ti on the grain size and the shape memory properties of the samples are investigated. Solution treatment (done at 850...

Voltammetric Determination of Zn(II) in Zn-Fe Alloy Electroplating Baths Using Square-Wave Voltammetry

Desenvolveu-se um método de análise de rotina para a determinação quantitativa de zinco em banhos de galvanoplastia de liga Zn-Fe através da técnica de voltametria de onda quadrada utilizando-se, como eletrodo de trabalho, o eletrodo de gota estática de mercúrio. Amostras reais de banhos de liga foram analisadas sem pré tratamento através do método de adição de padrão. Também foram feitos teste...

XANES Analysis of Zn species in Pd–Zn Alloy Nanoparticle Supported on Alumina